How To Replace a Saxophone Neck Cork
28.6 هزار بار بازدید -
7 سال پیش
-
This is a how-to video
This is a how-to video about replacing the cork on a saxophone neck.
Here are the tools you will need if you are going to recork a lot of saxophone necks. If you are just going to recork a few necks, you will need the supplies with the "*" and you can improvise on the other supplies:
*1/16 inch (1.6 mm) natural sheet cork Allied #A452
Bench Peg for holding the neck while sanding Allied #T1702
*Cork Cement Allied #A838
Torch Allied #T5010
Rawhide Mallet Allied #T1604
*150 Grit Sand Paper Ferree's #H112
*Ruler
*Masking Tape
*Razor
*Paraffin Wax
*Cork Grease
Do you want to leave a tip so Art can continue to make more quality videos?
TIP JAR - https://paypal.me/brassandwoodwindsho...
Here are the tools you will need if you are going to recork a lot of saxophone necks. If you are just going to recork a few necks, you will need the supplies with the "*" and you can improvise on the other supplies:
*1/16 inch (1.6 mm) natural sheet cork Allied #A452
Bench Peg for holding the neck while sanding Allied #T1702
*Cork Cement Allied #A838
Torch Allied #T5010
Rawhide Mallet Allied #T1604
*150 Grit Sand Paper Ferree's #H112
*Ruler
*Masking Tape
*Razor
*Paraffin Wax
*Cork Grease
Do you want to leave a tip so Art can continue to make more quality videos?
TIP JAR - https://paypal.me/brassandwoodwindsho...
7 سال پیش
در تاریخ 1396/04/14 منتشر شده
است.
28,637
بـار بازدید شده