ドレンパッキンでオイル漏れしないために知っておくべきこと❗

Check it every time you change the oil! How to distinguish the front and back of the drain packing Here, we will explain in detail about the drain packing, which is an important part for preventing oil leakage. The drain packing is attached to the drain bolt (drain plug) that is screwed into the oil pan, but there are two sides. Failure to do so may result in oil leakage. In this video, we will teach you how to distinguish between the front and back sides of the drain packing and how to replace it.

This time, we will use 12mm size packing for [Toyota 65 Noah]. Only one is used, but it is sold as a set of two at a nearby home center, so the remaining one will be used next time. I will also tell you that there is a note on the back of the product package that states that the packing has two sides.

If you find this video useful, please give it a thumbs up and subscribe. We are also waiting for your comments. Thank you for your continued support.

"Use tools"
[Vernier caliper] Daiso product ¥ 100
[Drain packing] 12mm for Toyota, Cainz home ¥198/2 pieces
[Needle nose pliers]

00:00 [Opening]

00:05 [Drain plug diameter measurement] Measure the bolt with a vernier caliper and confirm 12mm.

00:50 [Caution on using new packing] There are front and back sides.

01:49 [Ending] Thank you for watching. I would appreciate it if you could subscribe to the channel with a high rating. We are also waiting for your comments. Thank you for your continued support.

• #howto_style
• #ytccon
• #
• #
• #
• #
• #try
• #
• #
• #
• #
• #