Baileigh Industrial RDB-175 Hydraulic Tube Bender
204.7 هزار بار بازدید -
12 سال پیش
-
The RDB-175 Tube and Pipe
The RDB-175 Tube and Pipe Bender bending 28.5 x 1.5mm stainless steel tube to a 3.5D (100mm) centre line radius.
The new RDB-175 has a digital controller where you can set the bend angle and the machine will stop at this angle, previously this was an analogue system.
The RDB-175 has the capacity to bend the following;
-2.5" (63.5mm) mild steel tube
-60mm stainless steel tube
-2" (50.8mm) mild steel square tube
-1.25" (32mm) solid mild steel bar
Specification
-Min CLR 12mm
-Max CLR 228mm
-Min OD 6mm
-0-180 degrees in 12 secs (depending on material strength)
-Auto stop bend angle with DRO
-Foot pedal operated
-Quick change counter die mount
-Weight 285kgs
-Made in the USA
-240V, 50Hz Single phase 16 amps.
The new RDB-175 has a digital controller where you can set the bend angle and the machine will stop at this angle, previously this was an analogue system.
The RDB-175 has the capacity to bend the following;
-2.5" (63.5mm) mild steel tube
-60mm stainless steel tube
-2" (50.8mm) mild steel square tube
-1.25" (32mm) solid mild steel bar
Specification
-Min CLR 12mm
-Max CLR 228mm
-Min OD 6mm
-0-180 degrees in 12 secs (depending on material strength)
-Auto stop bend angle with DRO
-Foot pedal operated
-Quick change counter die mount
-Weight 285kgs
-Made in the USA
-240V, 50Hz Single phase 16 amps.
12 سال پیش
در تاریخ 1391/12/02 منتشر شده
است.
204,778
بـار بازدید شده