IT WORKS NOW!!! BMW 535i F10 Launch Control Coding With BimmerCode & How to Use It!
18 هزار بار بازدید -
3 سال پیش
-
In this video I use
In this video I use BimmerCode app to code launch control on my BMW 535i F10. If you don't have Sport+ on your BMW F10 5 series (or any F-Series BMW) you will need to code it.
DTC is traction 'mode'. in this mode the car works to keep power to the wheels in case of slip. (for snow, slush, or lead feet with big engines)
DSC is stability 'mode'. in this mode the car works to remove power from the wheels in the case of slip, and retain stability through yaw control.
It's not possible to have both dtc and dsc enabled, because they are 'opposite' control modes for the same system. this is why the ride selector has (sport+ w/dtc), as it's sport+ with traction mode (instead of stability mode).
pushing the dtc button once switchs from dsc (stability mode) to dtc (traction mode).
Holding down for three seconds disables dtc and dsc.
#bmwf10launchcontrol #bmwf10sporttransmission #bmwf10bimmercode
DTC is traction 'mode'. in this mode the car works to keep power to the wheels in case of slip. (for snow, slush, or lead feet with big engines)
DSC is stability 'mode'. in this mode the car works to remove power from the wheels in the case of slip, and retain stability through yaw control.
It's not possible to have both dtc and dsc enabled, because they are 'opposite' control modes for the same system. this is why the ride selector has (sport+ w/dtc), as it's sport+ with traction mode (instead of stability mode).
pushing the dtc button once switchs from dsc (stability mode) to dtc (traction mode).
Holding down for three seconds disables dtc and dsc.
#bmwf10launchcontrol #bmwf10sporttransmission #bmwf10bimmercode
3 سال پیش
در تاریخ 1400/06/18 منتشر شده
است.
18,042
بـار بازدید شده