Ford Fusion PCM Repair and Removal

Circuit Board Medics
Circuit Board Medics
204.2 هزار بار بازدید - 10 سال پیش -
http://circuitboardmedics.com/ford-fu...

This is a Ford Fusion PCM (Powertrain Control Module) repair service for a 2006, 2007, 2008, or 2009 Ford Fusion 3.0L V6 that has been damaged by a failed ignition coil. This is the most common problem with the PCM from these vehicles, and is often indicated by one or more of the following diagnostic trouble codes: P0351, P0352, P0353, P0354, P0355, P0356.

Our rebuild service is the easiest way to get back on the road and the ONLY way to avoid a trip to the dealership:

   There is NO PROGRAMMING REQUIRED!
   Your existing keys will work upon re-installation.

Each Fusion PCM is tested on an actual vehicle before it is shipped!

Even though damage to the PCM is typically caused by only one ignition coil, all 6 ignition coils and spark plugs MUST be replaced prior to re-installing the PCM to prevent premature failure of the computer again. Once a coil fails, the remaining 5 are likely not far behind.

This repair is ONLY for the above listed condition. If you are having any problems other than this, please call us at 800-547-2049.

WE ALSO OFFER EXCHANGE MODULES!!!
10 سال پیش در تاریخ 1393/10/19 منتشر شده است.
204,288 بـار بازدید شده
... بیشتر