Corona Old Boy maintenance and refill

In this video, I will show you how I maintain my butane lighter between refills and refill my butane lighter. The best kind of flints to use are corona flints. They come in this five pack with a brush. I'm going to use dunhill butane, but you can use any butane that is triple refined or better. The first step is to bleed the tank. I use the built in tamper as a screw driver to remove the fuel cap. Apply pressure to the refill valve to purge the lighter of any remaining fuel or air. This is the most important step in the process because it gets rid of all remaining propellant and fuel that could make the flame jump. When you clean it, you are going to want to make sure to get all build up off the sides. You are going to use a wet paper towel. Just make sure to get all of it. I use a pipe cleaner to get in hard to reach areas. I use the included brush to brush the flint wheel. Now remove the old flint. Then I use a pipe cleaner to clean the flint chamber. Now get a new flint. Drop it into the flint chamber and replace the pin. Flick the lighter a few times to give the new flint a good start. Press the refill tip downward into the center of the refill valve. Apply firm pressure for a few seconds. Replace the fuel cap and wait a few seconds for the gas to stabilize. When the lighter reaches room temperature it is safe to use. Thank you for watching and please subscribe. Questions and comments are appreciated.

• #howto_style
• #corona
• #old
• #boy
• #lighter
• #refill
• #maintenance
• #corona_old_boy
• #butane_lighter
• #lighter_cleaning
• #flint_lighter
• #best_lighter
• #howto
• #refilling_a_lighter
• #im_corona
• #corona_lighter
• #japan_lighter
• #oldboy
• #old_boy
• #lighter_collection
• #lighter_collecter