All About Lights | How to Install an Entry Light | This Old House

This Old House
This Old House
428.3 هزار بار بازدید - 10 سال پیش - This Old House host Kevin
This Old House host Kevin O'Connor illuminates the key steps to lighting up an entryway. (See below for tools and a shopping list.)
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse

Tools for How to Install an Entry Light:
- hammer
- wire strippers
- screwdriver
- drill/driver fitted with 1-inch spade bit and 2-inch hole saw
- flashlight
- caulk gun
- hammer-drill with 1/4-inch-diameter masonry bit
- 2-pound sledgehammer and 3/4-inch-wide cold chisel
- 1 1/2-inch-wide putty knife

Shopping list for How to Install an Entry Light:
- sconce-style entry light fixture
- nonmetallic electrical cable
- junction box
- electrical wall box
- cable staples
- twist-on wire connectors
- fireproof caulk
- brick mortar

About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.

Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
http://bit.ly/AskTOHIG
Tumblr: http://bit.ly/ThisOldHouseTumblr

For more on This Old House and Ask This Old House, visit us at: http://bit.ly/ThisOldHouseWebsite

All About Lights | How to Install an Entry Light | This Old House
thisoldhouse
10 سال پیش در تاریخ 1393/02/23 منتشر شده است.
428,375 بـار بازدید شده
... بیشتر