Samsung Note 10 Plus - Temperature Warning - Not Charging - NFC FPC Connector Microsoldering Repair

Here is a signature failure for the Samsung Note 10 and Note 10 Plus, where the connector for the wireless coil/NFC gets damaged and you get stuck with a Low Temperature Warning on the screen. It won't charge.

So we must replace the connector on the board through microsoldering.

✫Replacement NFC Conectors: https://www.mobilesentrix.com/nfc-con...
✫USB-C Ammeter Tester: https://amzn.to/2NLp7te

✫✫Microsoldering Tools we use & recommend: https://vccboardrepairs.com/gear

Support the channel & check out the links below

✫Buy Our Seek Macro Lens: https://vccboardrepairs.com/buy-macro...
✫Buy some VCC Board Repairs Merch! https://www.teespring.com/vcc-merch

✫Join us in the Profixerr 90 Day Microsoldering Course: https://profixerr.com/board-mastery

Follow us on Facebook to watch us go LIVE with some microsoldering repairs: Facebook: vccboardrepairs Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support! Please note: This page contains affiliate links. If you choose to make a purchase after clicking a link, I may receive a commission at no additional cost to you. Thank you for your support!

• #education
• #microsoldering
• #not_charging
• #nfc
• #samsung
• #note_10
• #note_10_plus
• #note_10
• #low_temp_warning
• #does_not_charge
• #wireless_coil
• #how_to
• #soldering