Enabling the Inductive Sensors for the LongMill CNC from Sienci Labs

Sienci Labs
Sienci Labs
5.5 هزار بار بازدید - پارسال - Title: How to Install Limit
Title: How to Install Limit Switches onto Your LongMill MK2 CNC

Description: In this tutorial video, I'll walk you through enabling the inductive sensors, how to set up multiple workspaces, changing the machine's home position, and troubleshooting.

Watch the first tutorial on installing the limit switches here. How to Install Limit Switches onto Yo...

// FEATURED TOOLS & SOFTWARES
MK2 Inductive Sensor Kit
https://bit.ly/3wBjOTp

Inductive Sensor Extension Cable
https://bit.ly/49Rw1lb

MK1 Inductive Sensor Kit
https://sienci.com/product/inductive-...

Mk1 Inductive Sensor Installation Video
Introducing the Inductive Sensor Kit ...

// RESOURCES
MK2 Limit Switches Resources
https://bit.ly/49LWhxa

MK2 Limit Switch Troubleshooting
https://bit.ly/3UTHUTl

Chapters:
0:00  Introduction
00:24 Flashing Firmware
00:42 Homing Enabled
1:16 Hard Limits Enabled
1:57 Soft Limits Enabled
3:33 Homing Controls
4:42 Sensor Positions
5:36 Setting up Workspaces
8:02 Sensor Diagnostic Test
8:51 Alarm 9 Troubleshooting
9:23 Alarm 8 Troubleshooting
9:57 Homing Switch Pull-Off

// PROJECT IDEAS
https://resources.sienci.com/view/lm-...

//  JOIN US
▸ Sienci Community | https://forum.sienci.com/
▸ Facebook Group | Facebook: mill.one
▸ Instagram | Instagram: siencilabs
پارسال در تاریخ 1402/03/31 منتشر شده است.
5,517 بـار بازدید شده
... بیشتر