Retroflag GPI Case 2 W: Raspberry Pi Zero 2W Emulation Test
830 بار بازدید -
9 ماه پیش
-
█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄[Synopsis]In this video, I test
█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█▀█
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Synopsis]
In this video, I test a number of emulators on the Retroflag GPI Case 2 W case with a Raspberry Pi Zero 2W single board computer using Retropie 4.8.
The Raspberry Pi Zero 2W is basically a Raspberry Pi 3 B+ with a quad-core CPU clocked at a lower frequency than the Raspberry Pi Zero 2W from 1.4 Ghz to 1.0 Ghz, and it has half the ram of a Raspberry Pi 3 B+ from 1 GB to 512 MB of RAM.
The Raspberry Pi Zero 2 W physically resembles a Raspberry Pi Zero W, but they are two very different SBCs. This board does generate more heat, because it has a quad-core Arm A53 processor vs. a 1 core ARMv6 processor. This will enable it to run more emulators with much better performance compared to a Raspberry Pi Zero W.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Test Parameters]
◙ Computer Board: Raspberry Pi Zero 2 W
• CPU: Broadcom BCM2710A1 @1GHz quad-core 64-bit Arm Cortex-A53 CPU
• GPU: VideoCore IV
• RAM: 512MB LPDDR2 SDRAM
• Storage: 64 GB microSD
• Operating System: Retropie 4.8
• Network: 2.4GHz 802.11 b/g/n wireless LAN
• Screen Resolution: 640 x 480
◙ Case: Retroflag GPI Case 2 W
◙ Emulators
• Atari 2600
• Atari 7800
• NES
• Nintendo Gameboy
• Sega Master System
• NEC PC-Engine/Turbografx-16
• Sega Genesis/Mega Drive
• Sega 32X
• Sega CD
• Super Nintendo Entertainment System
• SNK Neogeo
• Sony Playstation
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Synopsis]
In this video, I test a number of emulators on the Retroflag GPI Case 2 W case with a Raspberry Pi Zero 2W single board computer using Retropie 4.8.
The Raspberry Pi Zero 2W is basically a Raspberry Pi 3 B+ with a quad-core CPU clocked at a lower frequency than the Raspberry Pi Zero 2W from 1.4 Ghz to 1.0 Ghz, and it has half the ram of a Raspberry Pi 3 B+ from 1 GB to 512 MB of RAM.
The Raspberry Pi Zero 2 W physically resembles a Raspberry Pi Zero W, but they are two very different SBCs. This board does generate more heat, because it has a quad-core Arm A53 processor vs. a 1 core ARMv6 processor. This will enable it to run more emulators with much better performance compared to a Raspberry Pi Zero W.
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
[Test Parameters]
◙ Computer Board: Raspberry Pi Zero 2 W
• CPU: Broadcom BCM2710A1 @1GHz quad-core 64-bit Arm Cortex-A53 CPU
• GPU: VideoCore IV
• RAM: 512MB LPDDR2 SDRAM
• Storage: 64 GB microSD
• Operating System: Retropie 4.8
• Network: 2.4GHz 802.11 b/g/n wireless LAN
• Screen Resolution: 640 x 480
◙ Case: Retroflag GPI Case 2 W
◙ Emulators
• Atari 2600
• Atari 7800
• NES
• Nintendo Gameboy
• Sega Master System
• NEC PC-Engine/Turbografx-16
• Sega Genesis/Mega Drive
• Sega 32X
• Sega CD
• Super Nintendo Entertainment System
• SNK Neogeo
• Sony Playstation
▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄▄
█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█▄█
9 ماه پیش
در تاریخ 1402/07/14 منتشر شده
است.
830
بـار بازدید شده