CMOS Inverter in PSpice Orcad || How to simulate CMOS inverter on Orcad PSpice #pspicetutorial
15.9 هزار بار بازدید -
4 سال پیش
-
In this video, a step
In this video, a step by step procedure is shown to simulate CMOS inverter in orcad pspice tool. This video tutorial will guide to create and analyze a simple CMOS circuit in PSPICE Schematic.
Perform PSPICE schematics circuit simulation using following steps
1. Design circuit in schematics.
1). First insert all the parts without considering their values
2). Make the necessary rotations for the parts, and move the parts to appropriate locations.
3). Make all the necessary wire connections.
4). Mark the nodes you are interested in with labels.
5). Set the values for all the parts
2. Setup analysis to tell SPICE what simulation you need (transient analysis, DC sweep, etc.)
3. Run the simulation.
5. Observe the simulation results (traces of signals) in OrCAD PSpice A/D Demo.
Download OrCAD lite:
https://www.orcad.com/resources/downl...
Suggested:
Control system playlist :
Introduction to Control System | Open...
🖥️Computer Networks playlist:
#ComputerNetworks || Computer network...
Analog and Digital Communication playlist:
Analog and Digital Communication System
🌎Online utility playlist:
Google Forms Utilities II Google Form...
--------------------------------------------------------------------------------------------------------
🔔SUBSCRIBE to channel for more videos:
https://www.seevid.ir/c/forengineer...
--------------------------------------------------------------------------------------------------------
pspice tutorial for beginners, orcad pspice tutorial, CMOS on pspice tool
#pspicetutorial
#cmosinverter
#cmospspice
Perform PSPICE schematics circuit simulation using following steps
1. Design circuit in schematics.
1). First insert all the parts without considering their values
2). Make the necessary rotations for the parts, and move the parts to appropriate locations.
3). Make all the necessary wire connections.
4). Mark the nodes you are interested in with labels.
5). Set the values for all the parts
2. Setup analysis to tell SPICE what simulation you need (transient analysis, DC sweep, etc.)
3. Run the simulation.
5. Observe the simulation results (traces of signals) in OrCAD PSpice A/D Demo.
Download OrCAD lite:
https://www.orcad.com/resources/downl...
Suggested:
Control system playlist :
Introduction to Control System | Open...
🖥️Computer Networks playlist:
#ComputerNetworks || Computer network...
Analog and Digital Communication playlist:
Analog and Digital Communication System
🌎Online utility playlist:
Google Forms Utilities II Google Form...
--------------------------------------------------------------------------------------------------------
🔔SUBSCRIBE to channel for more videos:
https://www.seevid.ir/c/forengineer...
--------------------------------------------------------------------------------------------------------
pspice tutorial for beginners, orcad pspice tutorial, CMOS on pspice tool
#pspicetutorial
#cmosinverter
#cmospspice
4 سال پیش
در تاریخ 1399/08/14 منتشر شده
است.
15,900
بـار بازدید شده