Engine Bay Cleaning - Lexus ES300 Redo Project - Stage 2
5.8 هزار بار بازدید -
6 سال پیش
-
In the second stage of
In the second stage of the ES300 redo project, we cleaned out the engine bay / compartment. Since both the radiator and alternator were going to be replaced, we removed them before the pressure wash to get to the nooks and cranny's. We also removed the front wheels to clean the side engine and transmission areas as well as removed the battery to clean away any acid residue.
We used a water based engine cleaning spray solvent to soak the built up grease and oil. After soaking, a portable pressure wash machine attached to a garden hose was used to pressure wash off the solvent soaked areas.
After the engine bay was dry, we used a quart size bottle of Tire Shine that I bought at Dollar Tree for $1 to spray on all rubber and plastic components. The Tire Shine product works just like the expensive 303 Aerospace Protectant but at a fraction of the cost.
If you'd like to make a donation to the channel, please follow the link below: https://paypal.me/HardlyMoving?locale...
We used a water based engine cleaning spray solvent to soak the built up grease and oil. After soaking, a portable pressure wash machine attached to a garden hose was used to pressure wash off the solvent soaked areas.
After the engine bay was dry, we used a quart size bottle of Tire Shine that I bought at Dollar Tree for $1 to spray on all rubber and plastic components. The Tire Shine product works just like the expensive 303 Aerospace Protectant but at a fraction of the cost.
If you'd like to make a donation to the channel, please follow the link below: https://paypal.me/HardlyMoving?locale...
6 سال پیش
در تاریخ 1397/05/23 منتشر شده
است.
5,833
بـار بازدید شده