Making a Jewelry Box

Check out the plans for this project - https://www.toolstoday.com/small-wood...

Cutting out a jewelry box and engraving the bottom of a jewelry box on the Stepcraft M.1000 CNC machine using the Amana Tool 46202-K 1/4" downcut bit and 45771-K 30 degree Spektra™ coated engraving bit all linked below.
- - - - - - -
46202-K
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Depth per pass: .25"
- - - - - - -
45771-K
RPM: 18,000
Feed Rate: 48ipm
Plunge Rate: 24ipm
Depth per pass: .02"
#short #shorts

Tools Used:

Vectric Software for CNC https://www.toolstoday.com/everything...

STEPCRAFT M.1000 36 x 48” CNC Machine https://www.toolstoday.com/stepcraft-...

Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13779-46...

Amana Tool 45771-K Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking Router Bit
https://www.toolstoday.com/v-14233-45...

** Subscribe - toolstoday

** Shop the website - http://www.toolstoday.com