DTC Mini P1109 Short Explanation
1.2 هزار بار بازدید -
4 سال پیش
-
The video focuses on the
The video focuses on the basic Mini specific diagnostic error code.
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
- an explanation of what a bit is and how a byte is formed
- decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
- Possible causes or errors of the car and its parts describing the mentioned error
We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.
#maxidot #dtc #howto #diagnostictroublecode #mini
Make
MINI
Code
P1109
Definition
No Communication With SDM Restraint Module
Description
Key on, and a message from a learned ID number was not detected for the five seconds Modules on the Class 2 circuit monitor for data communications during vehicle operation When a module receives a message for critical data, the module records the identification number of the module sending the message for State of Health monitoring Node Alive messages Look for this code in All modules The one without this code may have failed
Cause
SDM Class 2 circuit is open, shorted to ground or to B+ SDM ignition power circuit has a high resistance condition SDM main ground circuits has a high resistance condition SDM module may have failed and is pulling the circuit low
Contents:
0:21 Basic DTC analysis according to OBD2 protocol standard.
1:48 Insight into programming
- an explanation of what a bit is and how a byte is formed
- decoding the Error Code to the base programming
2:58 A diagnostically understandable description of the Diagnostic Trouble Code
3:05 Basic error definition
- Possible causes or errors of the car and its parts describing the mentioned error
We will continue to work on improving the content.
Our efforts at Maxidot s.r.o.the video content gets better.
#maxidot #dtc #howto #diagnostictroublecode #mini
Make
MINI
Code
P1109
Definition
No Communication With SDM Restraint Module
Description
Key on, and a message from a learned ID number was not detected for the five seconds Modules on the Class 2 circuit monitor for data communications during vehicle operation When a module receives a message for critical data, the module records the identification number of the module sending the message for State of Health monitoring Node Alive messages Look for this code in All modules The one without this code may have failed
Cause
SDM Class 2 circuit is open, shorted to ground or to B+ SDM ignition power circuit has a high resistance condition SDM main ground circuits has a high resistance condition SDM module may have failed and is pulling the circuit low
4 سال پیش
در تاریخ 1399/03/24 منتشر شده
است.
1,215
بـار بازدید شده