Edelbrock Pro Flo 4 Installation
64.6 هزار بار بازدید -
5 سال پیش
-
Today, I’m going to be
Today, I’m going to be removing my FiTech EFI and installing the all new Edelbrock Pro Flo 4 EFI system.
You can get the Edelbrock Pro-Flo 4 here: amzn.to/2yCkAyk
The Edelbrock Pro Flo 4 Electronic fuel injection system has a great installation guide that I encourage everyone who is installing this system to look through. But the step by step of the installation is:
00:00 - Installation Introduction
01:36 - Remove throttle body and intake manifold
01:46 - Clean heads for ProFlo 4
02:51 - Install the Wide Band O2 sensor
03:25 - Test fit the Intake, Throttle Body and all wiring and harnesses
04:31 - Put a bead of RTV on intake heads
04:38 - Install Pro Flo 4 intake and throttle body
04:48 - Tighten intake bolts to around 20ftlbs
04:53 - Install Distributor
06:28 - Wire up all the wires
07:42 - Spark Plug wires
07:48 - Air Cleaner Sensor
08:09 - Fuel Pressure regulator
Now if only it were really that easy, haha!
Universal Joint Socket:
amzn.to/2YGi30y
Watch the Intake Manifold removal video:
• Installing an Intake Manifold on a Fo...
Watch the FiTech installation Video:
• How to Install FiTech EFI on Ford 302
Watch the Fuel Pump Installation Video:
• FiTech inline fuel pump install
Extra things I needed:
- Thermostat Gasket, or RTV amzn.to/339HiM4
- AN fitting for return line amzn.to/2LZGrIM
- Relay on the Fuel Pump amzn.to/2KlXocT
- Fuel pressure Regulator amzn.to/2KfLTos
- Fuel Pump amzn.to/3384RoD
Thanks for watching and be sure to SUBSCRIBE so you'll have more Early Bronco video's in your inbox! 📬
👕 10% Off Shirts! Use promo code: YOUTUBE bit.ly/NashEB 👕
🛠 Here are some of my favorite tools 🛠
www.amazon.com/shop/nashvilleearlybronco
👉🏼 My steering wheel 👉🏼 amzn.to/2NNX4on
➡️ www.nashvilleearlybronco.com/ ⬅️
🎥 SUBSCRIBE: bit.ly/2l5gZA0
📷 INSTAGRAM: bit.ly/NEBInstagram
💻 FACEBOOK: bit.ly/NEBroncoFacebook
#earlybronco #classicbronco #fordbronco
5 سال پیش
در تاریخ 1398/05/12 منتشر شده
است.
64,648
بـار بازدید شده