CNC Build Ep 3: How to Make an Avid CNC Very Precise - Aligning the Linear Rails!
6.7 هزار بار بازدید -
پارسال
-
CNC Build Playlist: • Avid
CNC Build Playlist: • Avid CNC Build
Ep 1: What CNC To Buy - https://www.seevid.ir/fa/w/VsXiz4nxAGc
Ep 2: Welded CNC Table - https://www.seevid.ir/fa/w/0h0Cra8IHaY
Ep 3: Making an Avid CNC Precise: https://www.seevid.ir/fa/w/iuii8j_ln1g
Ep 4: How to Tram a CNC: https://www.seevid.ir/fa/w/wP0vGhGectg
Ep 5: Automatic Tool Changer: https://www.seevid.ir/fa/w/Idkxx6mDVUo
Ep 6: ATC Tool Rack Build - https://www.seevid.ir/fa/w/ofZPG8ICE_Q
Ep 7: ATC Setup in Mach 4 - https://www.seevid.ir/fa/w/4q5K2tRYKoE
Ep 8: ATC Tool Heights - https://www.seevid.ir/fa/w/JNwBuiza2VU
Ep 9: ATC Post Processor Setup - https://www.seevid.ir/fa/w/Zs_Uf7siOO4
Ep 10: 3D Printed Dust Boot - https://www.seevid.ir/fa/w/lf1BBPod6NY
Ep 11: Improving the Avid CNC Table - https://www.seevid.ir/fa/w/kjERid1Kxp4
Ep 12: CNC Spoilboard - https://www.seevid.ir/fa/w/wUP99Vdxp3E
Precision Level: https://amzn.to/3oa3THl - $129
There are better machinist levels out there, but this one had a good price to value ratio, and it is a tool that I won't need to use a lot.
Dial Test Indicator: https://amzn.to/41CwqUG
I have a cheap ENCO one, (now MSC Industrial), but any one that goes from 0-1" and has .001" indications will work fine.
Digital Calipers: https://amzn.to/3myx7Q0
If you don't have digital calipers, then buy a cheap one to get your started. I own a MITUTOYO one now, which is pretty decent, but expensive.
Other notes: this is a good video in general for CNC Woodworking. If you do CNC wood stuff, and have a DIY machine, then you might find it useful information on how to fix some cutting issues due to the machine setup.
Thanks!
Corbin Dunn
https://www.corbinsworkshop.com/ // CNC files, and Products
https://www.corbinstreehoues.com/ // Blog, latest stuff
Chapters:
https://www.seevid.ir/fa/w/iuii8j_ln1g Intro
https://www.seevid.ir/fa/w/iuii8j_ln1g Problems with the Linear Rails
https://www.seevid.ir/fa/w/iuii8j_ln1g Fixing the Y Axis
https://www.seevid.ir/fa/w/iuii8j_ln1g Fixing the X Axis
https://www.seevid.ir/fa/w/iuii8j_ln1g Conclusion
* Some links are Amazon Affiliate Links, where I earn a small commission if you purchase the item. I only link to them because I have bought and used some of these items, and they worked well for me.
#cnc #cncwoodworking #avidcnc
پارسال
در تاریخ 1402/02/01 منتشر شده
است.
6,768
بـار بازدید شده