UCO Firestarting 101: Basics with Dan Wowak
59.2 هزار بار بازدید -
6 سال پیش
-
Full Article on fire starting
Full Article on fire starting and bushcraft basics on the UCO Blog from Dan Wowak at Coal Cracker Bushcraft.
https://blog.ucogear.com/fire-startin...
https://coalcrackerbushcraft.com/
Simply put, a fire is created when the triangle of fire is intact. The triangle of fire is an easy way to examine the necessary elements of fire. Each side of the triangle is comprised of one element: heat, oxygen or fuel. To best illustrate this, envision that each side of the triangle is pushing inward if any element is eliminated the triangle will collapse on itself and no fire will exist. Seems easy right? That’s really all there is to it. The complexity of fire making is having insight as to what element or elements are insufficient within the triangle. Possesing the knowledge to manipulate elements into their correct state will result in successfully starting a fire.
1. Heat – This is the element of the triangle that we introduce, whereas nature provides the other elements of fuel and oxygen. An open flame source provides the most reliable heat source and eliminates the need of using advanced techniques when starting a fire. Remember, heat can be dispersed quickly and ineffectively by an overabundance of fuel, moisture, or lack of oxygen.
2. Oxygen– Without a constant source of oxygen, the fire will quickly end. Always allow ample amounts of oxygen to enter into the fire lay. It is important that the fire can draw clean, fresh air in order to grow larger and stronger. When starting a fire, placing large amounts of wood over the heat source cuts off the oxygen flow, effectively smothering it.
3. Fuel – One of the most challenging elements of the triangle is choosing the correct fuel. It is extremely important to match the fuel source to the other two elements. When choosing the proper fuel source, visualize a lit match. If a large log were to be placed over the lit match, the flame would only able to heat a very small section of the large log. The log will never burn because there is too much fuel in comparison to the heat of the match. However, take the same match and place a toothpick sized stick above it. The flame from the match will engulf the small stick and ignite it into flame. The burning stick will now yield a larger flame allowing more sticks to be placed over it. Continue this process and soon you will be starting a fire.
ucogear.com
industrialrev.com
https://blog.ucogear.com/fire-startin...
https://coalcrackerbushcraft.com/
Simply put, a fire is created when the triangle of fire is intact. The triangle of fire is an easy way to examine the necessary elements of fire. Each side of the triangle is comprised of one element: heat, oxygen or fuel. To best illustrate this, envision that each side of the triangle is pushing inward if any element is eliminated the triangle will collapse on itself and no fire will exist. Seems easy right? That’s really all there is to it. The complexity of fire making is having insight as to what element or elements are insufficient within the triangle. Possesing the knowledge to manipulate elements into their correct state will result in successfully starting a fire.
1. Heat – This is the element of the triangle that we introduce, whereas nature provides the other elements of fuel and oxygen. An open flame source provides the most reliable heat source and eliminates the need of using advanced techniques when starting a fire. Remember, heat can be dispersed quickly and ineffectively by an overabundance of fuel, moisture, or lack of oxygen.
2. Oxygen– Without a constant source of oxygen, the fire will quickly end. Always allow ample amounts of oxygen to enter into the fire lay. It is important that the fire can draw clean, fresh air in order to grow larger and stronger. When starting a fire, placing large amounts of wood over the heat source cuts off the oxygen flow, effectively smothering it.
3. Fuel – One of the most challenging elements of the triangle is choosing the correct fuel. It is extremely important to match the fuel source to the other two elements. When choosing the proper fuel source, visualize a lit match. If a large log were to be placed over the lit match, the flame would only able to heat a very small section of the large log. The log will never burn because there is too much fuel in comparison to the heat of the match. However, take the same match and place a toothpick sized stick above it. The flame from the match will engulf the small stick and ignite it into flame. The burning stick will now yield a larger flame allowing more sticks to be placed over it. Continue this process and soon you will be starting a fire.
ucogear.com
industrialrev.com
6 سال پیش
در تاریخ 1397/02/31 منتشر شده
است.
59,240
بـار بازدید شده