Draining your Bullfrog Spa

Check out this video on how to drain your Bullfrog Spa.

Step 1: Turn-off main electrical breaker to spa.

Step 2: Locate drain below equipment compartment door.

Step 3: Pull the drain out with a slight clockwise turn. Use
pliers if needed.

NOTE: Drain is fully extended at approximately 2 inches (5
centimeters).

Step 4: Remove drain cap.

NOTE: The drain spout will not drain when fully extended.

Step 5: Attach a standard garden hose. Push the drain spout in
halfway to actuate the drain.

NOTE: The Spa will drain about 5 gallons (20 liters) per
minute. Ensure that the drainage is in an area safely away from
window wells or basement entries.

Step 6: Once the spa is fully drained, pull the drain spout out all
the way, remove hose, replace the drain cap and push drain in all
the way

Need to know how to fill your spa up? Check out this video
How to Fill up your Bullfrog Spa