How to Model A Simple Beam in Autodesk Robot
11.8 هزار بار بازدید -
2 سال پیش
-
Welcome to our tutorial on
Welcome to our tutorial on how to model a simple beam in Autodesk Robot. In this video, we'll guide you through the process of creating a new project, defining the beam's properties, loads, and supports, running a static analysis, and viewing the results in 3D.
Whether you're an engineer, architect, or student, this step-by-step guide will help you understand the basics of structural analysis and design. We'll start by showing you how to create a new project and define the beam's properties, such as its material, cross-section, and length.
Next, we'll add loads and supports to the beam, including point loads, distributed loads, and fixed supports. We'll also show you how to apply load combinations and load cases to simulate different scenarios.
Once we've defined the beam's properties, loads, and supports, we'll run a static analysis to calculate the beam's internal forces, such as bending moment, shear force, and axial force. We'll then view the results in 3D and analyze the beam's behavior under different loads and supports.
By the end of this video, you'll have a solid foundation for modeling more complex structures in Autodesk Robot. Don't forget to like, comment, and subscribe for more tutorials like this one!
Timestamps:
0:00 Introduction
0:45 Beam Illustration
1:12 Structural Grid
2:06 Structural Members
4:00 Drawing the Beam
5:18 Adding Supports
5:48 Adding Loads
7:41 Calculations and Results
8:56 Outro
Whether you're an engineer, architect, or student, this step-by-step guide will help you understand the basics of structural analysis and design. We'll start by showing you how to create a new project and define the beam's properties, such as its material, cross-section, and length.
Next, we'll add loads and supports to the beam, including point loads, distributed loads, and fixed supports. We'll also show you how to apply load combinations and load cases to simulate different scenarios.
Once we've defined the beam's properties, loads, and supports, we'll run a static analysis to calculate the beam's internal forces, such as bending moment, shear force, and axial force. We'll then view the results in 3D and analyze the beam's behavior under different loads and supports.
By the end of this video, you'll have a solid foundation for modeling more complex structures in Autodesk Robot. Don't forget to like, comment, and subscribe for more tutorials like this one!
Timestamps:
0:00 Introduction
0:45 Beam Illustration
1:12 Structural Grid
2:06 Structural Members
4:00 Drawing the Beam
5:18 Adding Supports
5:48 Adding Loads
7:41 Calculations and Results
8:56 Outro
2 سال پیش
در تاریخ 1401/05/14 منتشر شده
است.
11,800
بـار بازدید شده