How To Cut a Hole In Sheet Metal or Duct Work Using Basic Tools & Left & Right Aviation Tin Snips
75 هزار بار بازدید -
یک دقیقه پیش
-
My Favorite Tool:
My Favorite Tool: amzn.to/3NIFJuO
THE BEST Tin (Aviation) Snips: amzn.to/2KSTZAE
Step Bit Set: amzn.to/2nDF97W
Sheet Metal Hammer: amzn.to/2MKD0SJ
Large Screw Driver: amzn.to/2vRq4nZ
Tools We Recommend: www.amazon.com/shop/benjaminsahlstrom
Sometimes it's helpful to know the tips and tricks of working with duct work. This is one that should help you out pretty often if you're working on your duct system.
The tin snips linked above are the best ones I have ever used in the 10+ years I've been using tin snips.
0:00 - How To Cut a Hole In Duct Work Intro
0:12 - Mark Hole
0:33 - Ways To Start A Hole
1:16 - Screw Driver Method
2:00 - Push In Tin Snip And Cut
2:35 - When To Use A Green Or Red Tin Snip
4:12 - SUBSCRIBE!!!
Thanks for watching and subscribing! As an Amazon affiliate I earn from qualifying purchases. Thank you for your support!
Was this video helpful to you? Send a tip:www.paypal.me/bensahlstrom
Become a Patron: www.patreon.com/bensahlstrom
Blessings,
Ben
یک دقیقه پیش
در تاریخ 1403/07/13 منتشر شده
است.
75,022
بـار بازدید شده