How to Repair a Broken Doorbell | Ask This Old House
822 هزار بار بازدید -
8 سال پیش
-
Scott Caron, master electrician for
Scott Caron, master electrician for Ask This Old House, replaces a broken chime on a doorbell.
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for How to Repair a Broken Doorbell:
- Doorbell and chime
Tools for How to Repair a Broken Doorbell:
- Screwdriver
- Driver
Steps for How to Repair a Broken Doorbell:
1. Turn off the power source for the doorbell and undo the wire connections to remove the chime. Be sure to mark where each connection goes: front door, transformer, and rear door.
2. Attach the wires of the new chime to the existing wires and screw down the connections with a screwdriver.
3. Mount the new chime and screw it down using a driver.
4. Unscrew the old push button with a screwdriver and break those wire connections.
5. Attach the new push button wires to the existing wires using a screwdriver. If the new chime is digital, you may need to add diodes, which should be included with the chime.
6. Drive the new push button housing into the old screw holes.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Repair a Broken Doorbell | Ask This Old House
thisoldhouse
#ThisOldHouse #AskTOH
SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse
Shopping List for How to Repair a Broken Doorbell:
- Doorbell and chime
Tools for How to Repair a Broken Doorbell:
- Screwdriver
- Driver
Steps for How to Repair a Broken Doorbell:
1. Turn off the power source for the doorbell and undo the wire connections to remove the chime. Be sure to mark where each connection goes: front door, transformer, and rear door.
2. Attach the wires of the new chime to the existing wires and screw down the connections with a screwdriver.
3. Mount the new chime and screw it down using a driver.
4. Unscrew the old push button with a screwdriver and break those wire connections.
5. Attach the new push button wires to the existing wires using a screwdriver. If the new chime is digital, you may need to add diodes, which should be included with the chime.
6. Drive the new push button housing into the old screw holes.
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WGBH Boston.
Follow This Old House and Ask This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
http://bit.ly/AskTOHTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG
Tumblr: http://bit.ly/ThisOldHouseTumblr
How to Repair a Broken Doorbell | Ask This Old House
thisoldhouse
8 سال پیش
در تاریخ 1395/03/09 منتشر شده
است.
822,032
بـار بازدید شده