Build a Tryst 10 Trimaran Sailboat - Pt. 19 - Full build of the two amas (outriggers)

Irish Chippy
Irish Chippy
15.7 هزار بار بازدید - 4 سال پیش - In this video, I make
In this video, I make the two amas (vee hulled outriggers). They took just over 24 hours to complete. The solid gusset blocks are as follows:
Back of ama 185mm long approx. Angle: 45mm x 10mm
Front of ama 210mm long approx. Angle: 50mm x 10mm
After assembly, the distance between the back of the back gusset and the front of the front gusset is 1,170mm
If you like this video, you can buy me a coffee here: https://ko-fi.com/irishchippy Thank You
This is part 19 of my project to build a cheap trimaran sailboat from plans. It is called a Tryst 10, and was designed by Richard Woods. The main hull is a Duo 10, which can be sailed, rowed or propelled by an electric/solar trolling motor.

Our Amazon page: https://amzn.to/34rmcMy

Garmin Striker 4cv VIVID with GT20 transducer: https://amzn.to/3pAvBtk

Snappy plug cutter set: https://amzn.to/2JiAOFe

Stainless Steel 60mm x 8mm: https://amzn.to/3mFDGdJ

Honeywell Bionic Face Shield: https://amzn.to/33KQedb

3M 7502 respirator (medium): https://amzn.to/2ZsBEof

3M NIOSH P100 filters: https://amzn.to/35sNCC9

Hand Sander: https://amzn.to/32qGAvE

My for tools and consumables on our Amazon page. https://amzn.to/34rmcMy

Products are selected based on ratings and value for money, but we do get a commission on Amazon sales
Tryst 10 study plans can downloaded for free or full plans can be purchased, both here:  https://www.sailingcatamarans.com/
4 سال پیش در تاریخ 1399/09/09 منتشر شده است.
15,783 بـار بازدید شده
... بیشتر