NILES-SIMMONS N40 MC - Complete Machining Aircraft Landing Gear

This is a NILES-SIMMONS N40 MC machining center for the complete machining of landing gears. Turning length: 4.500mm Raw part: 180kg Finished part: 24kg Cycle time: 32hrs. Roughing and semi-finishing / 24hrs. finishing after hardening Operations: - external turning IT6 - 5-axis milling - deep drilling (ejector drilling) with 300l/min - internal turning IT6 Special clamping devices for 3 setups: roughing and semi-finishing and finishing.

• #people_blogs
• #niles_simmons
• #complete_machining
• #aircraft
• #landing_gear
• #internal_turning
• #milling
• #5_axis_milling
• #machining_center