How to Build a Chicken Coop the simple way

In this video I'll walk you through step by step on how to build your own chicken coop with just a saw, tape measure, drill, staple gun, and grinder Link to another coop design of mine as well https://www.seevid.ir/fa/w/Fos_GrPvbSk supplies needed is 16- 2x4x8 2-2x4x10 1- roll of welded wire 3ft x 50ft 6- 2ft x 8ft sheets of tin (sides and roof) 2- 2ft x 6ft sheets of tin (back) 1- box of #9 x 3 inch screws (72 Count) (2 boxes if you dont use the pocket screws option) 1- box of 2.5 inch pocket Screws 2- door hinges 1- box of 9/16 inch staples 1- 50 count box of woodtite fastener screws (for holding the tin on) cut lengths 4- 7.5 ft part of top and bottom main frame 4-57 inch make from the 2x4x10, these go with the 7.5ft to make your top and bottom frame 2-87 inch your center horizontal side boards 1-57 inch for your top center board going from one side to the other to support the tin 5-65 inch for your 4 legs and door frame 1-53 inch for the center back board horizontal 2-53.5 inches for the door 3- 16.5 inches for the door 1-24 inches for the brace under the door horizontal 1-25.25 inches for the center brace to the right of the door horizontal 3-30.75 inches for the sides and back wall upper half going vertical 1-32 inch for blocking door from opening inward 1-57 inch for perch ( I place mine 24 inch from the back wall)