How to Make Feather Earrings -- Quick and Simple Jewelry-making Tutorial
235.1 هزار بار بازدید -
13 سال پیش
-
Feather earrings are one of
Feather earrings are one of the tops trends this fall. Beautiful and very bohemian, these earrings can dress up a simple outfit effortlessly.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬
» Materials List «
• Two feathers
• A pair of ear wires
• Two eye pins
• Two small wooden beads
• Crimp beads
• Crimping pliers
• Long-nose pliers
» Instructions «
• Slide a crimp bead and a wooden bead on a feather. Slide an eye pin through the beads and adjust so the eye of the eye pin is above the quill of the feather. Secure the crimp bead with crimping pliers.
• Repeat last step with the other feather.
• Open the loop of an ear wire and attach a feather. Close the ear wire loop by bending it back and forth.
• Repeat last step with the other feather.
» Tips «
• If the shaft or stem of the feather is too large for a 2mm crimp bead, try a 3mm crimp bead.
• If the eye pin sticks out below the bead, trim it with wire cutters.
• If the bead slides down the feather, then apply a little glue to the bead hole to secure the bead.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬
SOCIALIZE WITH ME
http://www.CatFoxDesigns.com
Facebook – Facebook: catfoxdesigns
Instagram – Instagram: catfoxdesigns
Pinterest – Pinterest: catfoxdesigns
BUSINESS INQUIRIES
Please send an email to [email protected]
Disclaimer: All products used in this video were purchased by me. AllFreeBeadedJewelry has compensated me for this video.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬
» Materials List «
• Two feathers
• A pair of ear wires
• Two eye pins
• Two small wooden beads
• Crimp beads
• Crimping pliers
• Long-nose pliers
» Instructions «
• Slide a crimp bead and a wooden bead on a feather. Slide an eye pin through the beads and adjust so the eye of the eye pin is above the quill of the feather. Secure the crimp bead with crimping pliers.
• Repeat last step with the other feather.
• Open the loop of an ear wire and attach a feather. Close the ear wire loop by bending it back and forth.
• Repeat last step with the other feather.
» Tips «
• If the shaft or stem of the feather is too large for a 2mm crimp bead, try a 3mm crimp bead.
• If the eye pin sticks out below the bead, trim it with wire cutters.
• If the bead slides down the feather, then apply a little glue to the bead hole to secure the bead.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬
SOCIALIZE WITH ME
http://www.CatFoxDesigns.com
Facebook – Facebook: catfoxdesigns
Instagram – Instagram: catfoxdesigns
Pinterest – Pinterest: catfoxdesigns
BUSINESS INQUIRIES
Please send an email to [email protected]
Disclaimer: All products used in this video were purchased by me. AllFreeBeadedJewelry has compensated me for this video.
13 سال پیش
در تاریخ 1390/05/31 منتشر شده
است.
235,199
بـار بازدید شده