L322 Range Rover CV Axle Install
5.2 هزار بار بازدید -
11 ماه پیش
-
SurTrack RV8015 - Front Driver
SurTrack RV8015 - Front Driver Side CV Axle Shaft https://amzn.to/3FBYzlF
Torque specs
... Connect the upper arm and wheel knuckle Install a new nut and tighten to 70 Nm (52 lb.ft).
… Secure the stabilizer bar link.
Tighten the nut to 115 Nm (85 lb.ft).
…. Connect the tie-rod end ball joint.
Install a new nut and tighten to 70 Nm (52 lb.ft).
… . Secure the LH stabilizer link.
Tighten the nut to 115 Nm (85 lb.ft).
… . Tighten the halfshaft retaining nut to 350 Nm (258 lb.ft).
Stake the nut to the halfshaft
… .Set the height distance between the centre of the halfshaft end and the edge of the fender trim to
466 mm (18.34'').
… . Tighten the lower arm bolts to 275 Nm (203 lb.ft).
…. Install the wheels and tires.
Tighten the wheel nuts to 140 Nm (103 lb.ft).
… . Carry out the wheel alignment procedure.
#vevor #rangerover
11 ماه پیش
در تاریخ 1402/08/06 منتشر شده
است.
5,208
بـار بازدید شده