Does the FlyFire Manti 3 Plus actually work? DJI Mavic 3 / Air 2 / Pro 2 Drone Parachute Review
10.9 هزار بار بازدید -
2 سال پیش
-
Putting a parachute on your
Putting a parachute on your drone could be a great idea, or totally unnecessary. But it if you do, the FlyFire Manti 3 Plus (or manti 3) looks like a great option. We'll cover how I tested this using my FPV quadcopter (THIS IS NOT MEANT TO BE USED ON FPV DRONES--ONLY PHOTOGRAPHY-TYPE DRONES), and some important considerations when deciding to use a parachute.
Manti 3 Plus: https://s.zbanx.com/r/rBe14KP63Fgi
Manti 3: https://s.zbanx.com/r/peOrmdu2t8M5
⚠️ IMPORTANT: THESE PARACHUTES ARE DESIGNED FOR DJI DRONES ONLY.
I have been told they will NOT FUNCTION PROPERLY WITH FPV DRONES.
DISCLOSURE: thanks to FlyFire (via Zbanx) for providing my with this unit for the video, free of charge, and I get to keep it for ever and ever. Also, the above links are affiliate links from Zbanx, so they will get a commission if you make a purchase using that link.
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
Manti 3 Plus: https://s.zbanx.com/r/rBe14KP63Fgi
Manti 3: https://s.zbanx.com/r/peOrmdu2t8M5
⚠️ IMPORTANT: THESE PARACHUTES ARE DESIGNED FOR DJI DRONES ONLY.
I have been told they will NOT FUNCTION PROPERLY WITH FPV DRONES.
DISCLOSURE: thanks to FlyFire (via Zbanx) for providing my with this unit for the video, free of charge, and I get to keep it for ever and ever. Also, the above links are affiliate links from Zbanx, so they will get a commission if you make a purchase using that link.
🧠 FREE RESOURCES, 3D Printable Designs, and more for FPV Drones, RC Aircraft & 3D Printing at http://rcwithadam.com/
Want to support RCwithAdam? ↴
KO-FI: https://ko-fi.com/rcwithadam
OR
PATREON: Patreon: RCwithAdam
Thanks!
-------
Mandatory Affiliate Disclaimer:
Any links in this description may be affiliate links, which means I make a very small commission (at no additional cost to you) when you make a purchase through that link.
*DISCLAIMER: Remember to always use caution and your best judgement when building and flying RC aircraft, and when working with 3D printers, electronics, or electrical devices. Be mindful of the laws, regulations, and best practices for your particular location. Be a good neighbor, and HAVE FUN!*
-----------
About RCwithAdam: Adam's goal is to HELP YOU build your skills and eliminate frustration and confusion through creative, educational, and encouraging videos featuring Radio Control airplanes, FPV drones, electronics, and 3D printing!
#RCwithAdam
2 سال پیش
در تاریخ 1401/03/07 منتشر شده
است.
10,902
بـار بازدید شده