156. Cutting long skinny parts from a 2x4 using a circular saw.
15.1 هزار بار بازدید -
2 سال پیش
-
In this video, I demonstrate
In this video, I demonstrate cutting 1.5" square, 12" long legs out of a 2x4 using a circular saw and a cutting jig I designed and built. These legs are used in the construction of a bookcase shown in the previous video. (here's the link to that video: 155. Book storage explained )
I think it goes without saying but I'm going to say it anyway; if you decide to try and do anything you see me do in this video (or in any of my videos for that matter), you and you alone are responsible for your own safety. Using power tools whether corded or battery powered can be very dangerous when used improperly. Be sure to follow all of the tool manufacture's safety instructions. Spending time in your workshop making stuff should be fun and rewarding so be SMART and be SAFE. Please and thank-you.
Prior to making this video, I had always cut larger flat pieces using a circular saw and a saw guide. To be able to cut narrow, long pieces safely (in my opinion), I had to come up with a way to support the piece being cut while still using a saw guide. That's why I decided to try and design a jig. To guide the saw, I decided to try using the rip fence that came with the saw. This video shows the results of my efforts.
Thanks for watching.
-------
Music:
"Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/b...
If you have read this far, THANK-YOU. Please leave me a comment letting me know.
I think it goes without saying but I'm going to say it anyway; if you decide to try and do anything you see me do in this video (or in any of my videos for that matter), you and you alone are responsible for your own safety. Using power tools whether corded or battery powered can be very dangerous when used improperly. Be sure to follow all of the tool manufacture's safety instructions. Spending time in your workshop making stuff should be fun and rewarding so be SMART and be SAFE. Please and thank-you.
Prior to making this video, I had always cut larger flat pieces using a circular saw and a saw guide. To be able to cut narrow, long pieces safely (in my opinion), I had to come up with a way to support the piece being cut while still using a saw guide. That's why I decided to try and design a jig. To guide the saw, I decided to try using the rip fence that came with the saw. This video shows the results of my efforts.
Thanks for watching.
-------
Music:
"Aces High" Kevin MacLeod (incompetech.com)
Licensed under Creative Commons: By Attribution 4.0 License
http://creativecommons.org/licenses/b...
If you have read this far, THANK-YOU. Please leave me a comment letting me know.
2 سال پیش
در تاریخ 1401/10/18 منتشر شده
است.
15,173
بـار بازدید شده