My Tech. NOOK HD+ Cyanogenmod install with root and Clockworkmod
17.7 هزار بار بازدید -
9 سال پیش
-
This is not a guide
This is not a guide only an explanation of what I have done myself. If you do this to your own device, it is entirely at your own risk.
What I needed
2gb-4gb MicroSD card and adaptor to connect to usb port
What To Download
SD Card Formatter
Old link
cm-11-20141112-SNAPSHOT-M12-ovation.zip
http://download.cyanogenmod.org/get/j...
New link
https://download.cyanogenmod.org/?dev...
gapps-kk-20140606-signed.zip
https://www.androidfilehost.com/?fid=...
NookHDplus-CWM-6046-for-internal-memory-rev0-07-13-14.zip
http://forum.xda-developers.com/attac...
First of all I placed the MicroSD card into the adapter and plugged it into the USB port
Next after it had been recognised by Windows I opened file explorer and confirmed the drive letter.
Now I installed and opened SD Card Formatter opened it and formatted the SD card ensuring I use the same drive letter and making sure the drive size matched my MicroSD card. This is a far better and more compatible formatter than that which comes with Windows.
Now the tricky bit. I could not set the MicroSD card partition active in Windows Disk management. If I had done I would have removed active status from those on my PC.
So I then followed this guide to set it active via the command prompt interface.
http://www.groovypost.com/howto/howto...
I used step 3 and the third and fourth command in step 4 Select partition # and active.
I then copied;
gapps-kk-20140606-signed.zip
and
cm-11-20141112-SNAPSHOT-M12-ovation.zip onto the
I next used 7zip to unzip
NookHDplus-CWM-6046-for-internal-memory-rev0-07-13-14.zip
And copied the contents onto the card also copying the file MLO first before copying the other four files on.
BUT I did not use the tray icon to safely eject the drive as this caused it to lose the active status. Instead I removed the MicroSD card from the adapter and left the adapter still in the USB socket.
I was then ready to begin the flash of CWW onto the NOOK.
I placed the card into the SD slot on the NOOK and powered on
Used the volume keys to navigate to backup my system and data and did a full backup.
Used the power key to go back when it had finished not turning it off
I then did a system and data reset
Again I used the power button to go back and selected install from /external/SD
cm-11-20141112-SNAPSHOT-M12-ovation.zip
again after it finished I went back again and used the same menu choice to install
gapps-kk-20140606-signed.zip
Then for the last time I used the power button as a back button to go back and select restart. Before doing this I had the card slot cover open so I could quickly remove the cared before the NOOK restarted.
After restart I waited for the system to fully configure before starting to use the NOOK.
What I needed
2gb-4gb MicroSD card and adaptor to connect to usb port
What To Download
SD Card Formatter
Old link
cm-11-20141112-SNAPSHOT-M12-ovation.zip
http://download.cyanogenmod.org/get/j...
New link
https://download.cyanogenmod.org/?dev...
gapps-kk-20140606-signed.zip
https://www.androidfilehost.com/?fid=...
NookHDplus-CWM-6046-for-internal-memory-rev0-07-13-14.zip
http://forum.xda-developers.com/attac...
First of all I placed the MicroSD card into the adapter and plugged it into the USB port
Next after it had been recognised by Windows I opened file explorer and confirmed the drive letter.
Now I installed and opened SD Card Formatter opened it and formatted the SD card ensuring I use the same drive letter and making sure the drive size matched my MicroSD card. This is a far better and more compatible formatter than that which comes with Windows.
Now the tricky bit. I could not set the MicroSD card partition active in Windows Disk management. If I had done I would have removed active status from those on my PC.
So I then followed this guide to set it active via the command prompt interface.
http://www.groovypost.com/howto/howto...
I used step 3 and the third and fourth command in step 4 Select partition # and active.
I then copied;
gapps-kk-20140606-signed.zip
and
cm-11-20141112-SNAPSHOT-M12-ovation.zip onto the
I next used 7zip to unzip
NookHDplus-CWM-6046-for-internal-memory-rev0-07-13-14.zip
And copied the contents onto the card also copying the file MLO first before copying the other four files on.
BUT I did not use the tray icon to safely eject the drive as this caused it to lose the active status. Instead I removed the MicroSD card from the adapter and left the adapter still in the USB socket.
I was then ready to begin the flash of CWW onto the NOOK.
I placed the card into the SD slot on the NOOK and powered on
Used the volume keys to navigate to backup my system and data and did a full backup.
Used the power key to go back when it had finished not turning it off
I then did a system and data reset
Again I used the power button to go back and selected install from /external/SD
cm-11-20141112-SNAPSHOT-M12-ovation.zip
again after it finished I went back again and used the same menu choice to install
gapps-kk-20140606-signed.zip
Then for the last time I used the power button as a back button to go back and select restart. Before doing this I had the card slot cover open so I could quickly remove the cared before the NOOK restarted.
After restart I waited for the system to fully configure before starting to use the NOOK.
9 سال پیش
در تاریخ 1394/08/18 منتشر شده
است.
17,771
بـار بازدید شده