Trash to Treasure: Restoring a 44-year-old VIC 20 and make it NEW again!
490 بار بازدید -
4 هفته پیش
-
🕹️ In this episode, I
🕹️ In this episode, I look at doing a light restoration of the VIC 20 purchased in the previous video. The aim is to ensure this historic computer is safe to operate, cleaned, serviced and ready for many more decades of use.
🚀 Will I be able to get it looking and operating like NEW again?
💡 Additional Retrobright Tips
1) Thoroughly clean plastics before using Hydrogen Peroxide. Any dirt or previously applied solutions like plastic protectant WILL cause a marbling effect.
2) Remove metal badges using a hairdryer and pin lifting labels from an edge. Keep the label as flat as possible when lifting it up.
3) The diluted Hydrogen Peroxide solution (seen in this video) may take several days to achieve a result. The water needs to be warm. Check on the progress every 30 minutes - also ensure the plastic remains under water.
4) Results using the above method may not be perfect. For example heat damaged spots may not lighten as much as UV damaged areas. In which case, use cream Hydrogen Peroxide (40 Vol 12%) applied evenly to the plastic. Wrap the case in plastic wrap, and place in direct sunlight for 2-3 hours.
5) Don't be afraid using sandpaper to even out surfaces and remove the shine from the front part of the breadbin case. Ensure you wet sand using 400-600 grit paper in circlular motions across the affected area.
🙏 Thanks for watching! Become a member and support me on:
Patreon: Patreon: evansretrolane
Ko-fi: https://ko-fi.com/evansretrolane
🔗 Links
I purchased all the parts used in this video from:
Retroleum https://www.retroleum.co.uk/
Retro8BITshop https://retro8bitshop.com/
Retro Fuzion https://www.retrofuzion.com/
The Future was 8bit https://www.tfw8b.com/product/vic20-p...
🎵 Music
Infinity Produced by Aries Beats Aries Beats - Infinity (80s Retro Sax...
Space Moon Produced by Aries Beats 1h Free No Copyright Music | 80s Synt...
Breakfast Club Produced by Danya Vodovoz Breakfast Club - 80s revisited - Roya..., Royalty Free Music
Electric Vibe Produced by G.Socarras @ Digital Synthwave ELECTRIC VIBE- /Synthwave / Retro 80'...
Night Rider by jiglr jiglr - Night Rider
💾 Index
00:00 In This Video
00:51 Introduction
01:42 Initial Testing
05:43 VIC-20 Disassembly
07:08 VIC-20 Case
09:53 Datasette
11:08 VIC-20 Keyboard
14:36 VIC-20 Motherboard
16:40 Joystick
18:45 Reassembly and Testing
20:49 The Big Reveal
22:40 Final Thoughts
On the road to 500 subscribers !! So go ahead and subscribe to be kept in the loop of all things retro! 🥰
Subscription Count:
208 Subscribers - July 13th 2024
#retrocomputers #nostalgiatrip #80s #90s #nostalgicjourney #vintagevibes #retrogaming #retrogames #commodorevic20 #vic20 #techhistory #techeducation #restoration
🚀 Will I be able to get it looking and operating like NEW again?
💡 Additional Retrobright Tips
1) Thoroughly clean plastics before using Hydrogen Peroxide. Any dirt or previously applied solutions like plastic protectant WILL cause a marbling effect.
2) Remove metal badges using a hairdryer and pin lifting labels from an edge. Keep the label as flat as possible when lifting it up.
3) The diluted Hydrogen Peroxide solution (seen in this video) may take several days to achieve a result. The water needs to be warm. Check on the progress every 30 minutes - also ensure the plastic remains under water.
4) Results using the above method may not be perfect. For example heat damaged spots may not lighten as much as UV damaged areas. In which case, use cream Hydrogen Peroxide (40 Vol 12%) applied evenly to the plastic. Wrap the case in plastic wrap, and place in direct sunlight for 2-3 hours.
5) Don't be afraid using sandpaper to even out surfaces and remove the shine from the front part of the breadbin case. Ensure you wet sand using 400-600 grit paper in circlular motions across the affected area.
🙏 Thanks for watching! Become a member and support me on:
Patreon: Patreon: evansretrolane
Ko-fi: https://ko-fi.com/evansretrolane
🔗 Links
I purchased all the parts used in this video from:
Retroleum https://www.retroleum.co.uk/
Retro8BITshop https://retro8bitshop.com/
Retro Fuzion https://www.retrofuzion.com/
The Future was 8bit https://www.tfw8b.com/product/vic20-p...
🎵 Music
Infinity Produced by Aries Beats Aries Beats - Infinity (80s Retro Sax...
Space Moon Produced by Aries Beats 1h Free No Copyright Music | 80s Synt...
Breakfast Club Produced by Danya Vodovoz Breakfast Club - 80s revisited - Roya..., Royalty Free Music
Electric Vibe Produced by G.Socarras @ Digital Synthwave ELECTRIC VIBE- /Synthwave / Retro 80'...
Night Rider by jiglr jiglr - Night Rider
💾 Index
00:00 In This Video
00:51 Introduction
01:42 Initial Testing
05:43 VIC-20 Disassembly
07:08 VIC-20 Case
09:53 Datasette
11:08 VIC-20 Keyboard
14:36 VIC-20 Motherboard
16:40 Joystick
18:45 Reassembly and Testing
20:49 The Big Reveal
22:40 Final Thoughts
On the road to 500 subscribers !! So go ahead and subscribe to be kept in the loop of all things retro! 🥰
Subscription Count:
208 Subscribers - July 13th 2024
#retrocomputers #nostalgiatrip #80s #90s #nostalgicjourney #vintagevibes #retrogaming #retrogames #commodorevic20 #vic20 #techhistory #techeducation #restoration
4 هفته پیش
در تاریخ 1403/04/23 منتشر شده
است.
490
بـار بازدید شده