IoT Based Plant Watering System Indoor project using ESP32 Blynk | IoT Projects 2023
69 هزار بار بازدید -
پارسال
-
In this IoT internet of
In this IoT internet of things project, I have shown how to make the IoT based indoor plant watering system using ESP32 Blynk and a soil moisture sensor. The ESP32 will control the water pump automatically as per the soil moisture level. You can control and monitor the moisture level, and temperature from anywhere in the world on Blynk IoT.
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: https://www.altium.com/yt/techstudycell
Free search engine for the best quality components from Octopart: https://www.octopart.com
Download the PCB Layout for the Automatic Plant Watering system project.
https://iotcircuithub.com/wp-content/...
Download the Code for the ESP32 Blynk smart plant watering system.
https://iotcircuithub.com/wp-content/...
Download the PCB Gerber file for the IoT-based plant monitoring system.
https://iotcircuithub.com/wp-content/...
Help my projects on Patreon: Patreon: techstudycell
Feel free to donate any amount: https://paypal.me/sdaspay
For this IoT-based plant watering system, you can set the ideal moisture level for the soil. In AUTO mode, the water pump will ON/OFF automatically to maintain the moisture level. In manual mode, you can control the pump manually.
You can also monitor the soil moisture level, temperature, humidity, and current mode on the OLED display if wifi not available.
During this video, I made the circuit on zero PCB using the PCB layout, and also shared the plant monitoring system circuit and source code.
During the ESP32 project video, I covered the following topics:
00:24 Quick demo on the automatic watering system for plants.
02:55 Required components for the ESP32 IoT project.
03:09 Circuit diagram of the ESP32 plant watering system.
03:40 How to make plant watering system project on Zero PCB.
04:49 Set up Blynk IoT Cloud for ESP32.
08:00 How to get the MIN MAX values of the capacitive moisture sensor.
08:43 Source code for the IoT-based plant monitoring system.
10:31 Set up new Blynk IoT app to monitor soil moisture level.
12:01 How to install the indoor plant watering system.
Required components for the indoor plant watering system.
1) ESP32 DEV KIT V1
2) Capacitive soil moisture sensor V2.0
3) DHT11 Sensor
4) 0.96" OLED Display
5) 1k 0.25watt Resistors (R1-R6) - 6 no
6) 1N4007 diode
7) BC547 NPN Transistor
8) TIP122 NPN Transistor with heat sink
9) LEDs 5mm - 4no
10) 7805 voltage regulator with heat sink
11) 2-pin Push Button - 2no
12) 2-pin Terminal connectors (2 no)
13) 3-pin Terminal connectors (1 no)
14) 5V DC Buzzer
15) 100uF 25V capacitor (C1)
16) 100nF 330nF AC capacitors (C1, C2)
17) 12V DC pump or solenoid valve
18) 12V DC supply.
Amazon India Affiliate links:
ESP32: https://amzn.to/331pohb
12V DC Solenoid valve: https://amzn.to/3xzZJKg
0.96" OLED: https://amzn.to/3Z1TVVH
Amazon United States Affiliate links:
ESP32: https://amzn.to/3mBjCch
12V DC Solenoid valve: https://amzn.to/3I9HErq
Important points:
1. You can eighter use a 12V DC pump or 12V solenoid valve.
2. Use heat sinks with 7805 regulator, and TIP122 transistor.
3. Use a stable DC power supply.
4. Enter the MIN & MAX capacitive moisture sensor reading as shown in the video.
5. If Blynk is not connected, you can change mode, and control the pump with push buttons.
6. Please watch the complete video, otherwise you may face some issues.
This IoT-based DIY plant watering system will maintain the soil moisture level which will be helpful for plant growth and also save water resources. So you can use this IoT project as an indoor plant monitoring system for vacation. This ESP32 project can also be used as IoT in agriculture.
If you face any issues please let me know in the comment section.
#iotprojects #esp32project #blynk
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more projects: https://iotcircuithub.com/
Facebook: Facebook: techstudycell
Instagram: Instagram: techstudycell
Telegram: https://t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
ESP32 Projects
Latest NodeMCU projects playlist:
NodeMCU Projects
Arduino Home Automation Projects playlist:
Arduino Projects
Get a free trial of the world's most trusted PCB design software, Altium Designer with 365 and 25% off your purchase: https://www.altium.com/yt/techstudycell
Free search engine for the best quality components from Octopart: https://www.octopart.com
Download the PCB Layout for the Automatic Plant Watering system project.
https://iotcircuithub.com/wp-content/...
Download the Code for the ESP32 Blynk smart plant watering system.
https://iotcircuithub.com/wp-content/...
Download the PCB Gerber file for the IoT-based plant monitoring system.
https://iotcircuithub.com/wp-content/...
Help my projects on Patreon: Patreon: techstudycell
Feel free to donate any amount: https://paypal.me/sdaspay
For this IoT-based plant watering system, you can set the ideal moisture level for the soil. In AUTO mode, the water pump will ON/OFF automatically to maintain the moisture level. In manual mode, you can control the pump manually.
You can also monitor the soil moisture level, temperature, humidity, and current mode on the OLED display if wifi not available.
During this video, I made the circuit on zero PCB using the PCB layout, and also shared the plant monitoring system circuit and source code.
During the ESP32 project video, I covered the following topics:
00:24 Quick demo on the automatic watering system for plants.
02:55 Required components for the ESP32 IoT project.
03:09 Circuit diagram of the ESP32 plant watering system.
03:40 How to make plant watering system project on Zero PCB.
04:49 Set up Blynk IoT Cloud for ESP32.
08:00 How to get the MIN MAX values of the capacitive moisture sensor.
08:43 Source code for the IoT-based plant monitoring system.
10:31 Set up new Blynk IoT app to monitor soil moisture level.
12:01 How to install the indoor plant watering system.
Required components for the indoor plant watering system.
1) ESP32 DEV KIT V1
2) Capacitive soil moisture sensor V2.0
3) DHT11 Sensor
4) 0.96" OLED Display
5) 1k 0.25watt Resistors (R1-R6) - 6 no
6) 1N4007 diode
7) BC547 NPN Transistor
8) TIP122 NPN Transistor with heat sink
9) LEDs 5mm - 4no
10) 7805 voltage regulator with heat sink
11) 2-pin Push Button - 2no
12) 2-pin Terminal connectors (2 no)
13) 3-pin Terminal connectors (1 no)
14) 5V DC Buzzer
15) 100uF 25V capacitor (C1)
16) 100nF 330nF AC capacitors (C1, C2)
17) 12V DC pump or solenoid valve
18) 12V DC supply.
Amazon India Affiliate links:
ESP32: https://amzn.to/331pohb
12V DC Solenoid valve: https://amzn.to/3xzZJKg
0.96" OLED: https://amzn.to/3Z1TVVH
Amazon United States Affiliate links:
ESP32: https://amzn.to/3mBjCch
12V DC Solenoid valve: https://amzn.to/3I9HErq
Important points:
1. You can eighter use a 12V DC pump or 12V solenoid valve.
2. Use heat sinks with 7805 regulator, and TIP122 transistor.
3. Use a stable DC power supply.
4. Enter the MIN & MAX capacitive moisture sensor reading as shown in the video.
5. If Blynk is not connected, you can change mode, and control the pump with push buttons.
6. Please watch the complete video, otherwise you may face some issues.
This IoT-based DIY plant watering system will maintain the soil moisture level which will be helpful for plant growth and also save water resources. So you can use this IoT project as an indoor plant monitoring system for vacation. This ESP32 project can also be used as IoT in agriculture.
If you face any issues please let me know in the comment section.
#iotprojects #esp32project #blynk
-----------
Thanks For Watching...
✅ SUBSCRIBE ✅LIKE ✅SHARE ✅ COMMENTS
Find out more projects: https://iotcircuithub.com/
Facebook: Facebook: techstudycell
Instagram: Instagram: techstudycell
Telegram: https://t.me/techstudycell/
-----------
-----------
WARNING:
This video is for demonstration and educational purposes only.
Each demonstration presents risks and hazards that must be fully understood before attempting.
And should be performed only by professionals
-----------
Other useful IoT projects:
Latest ESP32 projects playlist:
ESP32 Projects
Latest NodeMCU projects playlist:
NodeMCU Projects
Arduino Home Automation Projects playlist:
Arduino Projects
پارسال
در تاریخ 1401/11/29 منتشر شده
است.
69,075
بـار بازدید شده