How To Setup KEYLESS FACTORY LCD SMART KEY Shell - Lexus Key - Upgrade your Smart Keys today!
48.7 هزار بار بازدید -
3 سال پیش
-
Add some pizzazz to that
Add some pizzazz to that boring Smart Key!
https://uhslink.com/LCD_REM_KLF
Easy to set up and incredible to use
Brand New Aftermarket SHELL:
OBD Programmable
Battery: USB Rechargeable
Buttons: Lock, Unlock, Trunk, Option
No Emergency Key Included
Blue Finish
Manufacturer: Keyless Factory
-
Louie Felix
Product Specialist
Vehicle: 2012 LEXUS CT200H
Universal LCD Smart Remote Shell from Keyless Factory
_____
You need:
a Programmed Remote
and a Soldering Iron
First Open the remote shell to remove the programmed PCB Board and place it to the side
Next, remove the case back of the LCD Remote to reveal the wire harness.
Carefully remove the wire harness and take not of the wire color order in relation to the PCB Board Contact points.
Attach each wire according to the guide to the diagonally opposed solder points of each button and the battery connectors on the rear
once complete, insert the harness back into its slot with care, place the PCB into the Remote Case and screw it shut.
Many customizing options are available for screen touch times, signal sensitivities, battery saving and aesthetic of screen and button layouts.
Now we can test the remote functions using the LCD Remote
And Keyless Enter & Go
https://www.uhs-hardware.com/
Follow UHS:
facebook - Facebook: UHSHardware
linkedin - LinkedIn: 20539055
twitter - Twitter: UHSHardware
insta - Instagram: uhshardware
https://uhslink.com/LCD_REM_KLF
Easy to set up and incredible to use
Brand New Aftermarket SHELL:
OBD Programmable
Battery: USB Rechargeable
Buttons: Lock, Unlock, Trunk, Option
No Emergency Key Included
Blue Finish
Manufacturer: Keyless Factory
-
Louie Felix
Product Specialist
Vehicle: 2012 LEXUS CT200H
Universal LCD Smart Remote Shell from Keyless Factory
_____
You need:
a Programmed Remote
and a Soldering Iron
First Open the remote shell to remove the programmed PCB Board and place it to the side
Next, remove the case back of the LCD Remote to reveal the wire harness.
Carefully remove the wire harness and take not of the wire color order in relation to the PCB Board Contact points.
Attach each wire according to the guide to the diagonally opposed solder points of each button and the battery connectors on the rear
once complete, insert the harness back into its slot with care, place the PCB into the Remote Case and screw it shut.
Many customizing options are available for screen touch times, signal sensitivities, battery saving and aesthetic of screen and button layouts.
Now we can test the remote functions using the LCD Remote
And Keyless Enter & Go
https://www.uhs-hardware.com/
Follow UHS:
facebook - Facebook: UHSHardware
linkedin - LinkedIn: 20539055
twitter - Twitter: UHSHardware
insta - Instagram: uhshardware
3 سال پیش
در تاریخ 1400/10/13 منتشر شده
است.
48,717
بـار بازدید شده