How to enable the G37 Tire Pressure menu: MotorvateDIY Garage Ep.51
8.7 هزار بار بازدید -
11 ماه پیش
-
**Top Tip from robertromine1602** Make
**Top Tip from robertromine1602**
Make sure you have "view filename extension" turn on, otherwise it may be saved as "UsbDebugStart.ivanaX.txt"
*If you have a laptop with USB C, the standard USB C to USB A cable will also work*
*NOTE: 16 & 32 GB Memory Stick DO work!!*
After more testing, I was able to get both a 16 and 32 GB memory stick to work!
I needed to use the official SDcard.org (official governing body of SD card standards) formatting program :
(https://www.sdcard.org/downloads/form...)
and now both 16 and 32GB memory sticks work.
Items needed:
• USB A to A cable (male to male) https://amzn.to/3rsLDef
• USB memory stick or thumb drive of 4 to 32 GB.
• Windows 10 or Windows 11 laptop (Won't work on Windows 7)
For some reason formatting them on Windows 11 and Mac OS Ventura didn't work...
BUT the official SD formatter did!
This should make it a little easier to find a USB stick to do this.
If this or any other MotorvateDIY video has helped you or saved you money, please consider supporting this
channel: https://ko-fi.com/motorvatediy
Anything you can do is greatly appreciated!
Amazon affiliate link for the "USB 3.0 A to A Male Cable" used in the episode:
3ft/1m
https://amzn.to/3rsLDef
6ft/2m
https://amzn.to/3EJFg9H
9ft/3m
https://amzn.to/3Rz0puH
Note:
MotorvateDIY only endorses items we've personally used and liked.
As an Amazon Associate, if you purchase anything using our referral links, we may get a small commission at no additional cost to you.
*Disclaimer*
If you decide to follow the steps in the video, you agree to take full responsibility for your actions.
I assume no responsibility or liability.
These steps have been tested on my G37 for the last 3 months, without any problems.
However, that is not a long time to test and that is just one car.
On this episode of MotorvateDIY garage, we'll show you how to enable the "Tire Pressure" menu on the 2010-2013 G37's navigation system.
If your G37 doesn't have navigation, unfortunately, these steps won't work. :(
In the video, we show you how to make a back up copy of the navigation's configuration, before any changes are made. If there are problems, it can easily be put back to how it was :)
I enabled my Tire Pressure menu on my G37 about 3 months ago.
There has not been any problems and everything continues to work just like it did before.
Items needed:
• USB A to A cable (male to male) https://amzn.to/3rsLDef
• USB memory stick or thumb drive of 4 to 32 GB.
• Windows 10 or Windows 11 laptop (Won't work on Windows 7)
Thanks for watching and please let me know in the comments how you made out!
Make sure you have "view filename extension" turn on, otherwise it may be saved as "UsbDebugStart.ivanaX.txt"
*If you have a laptop with USB C, the standard USB C to USB A cable will also work*
*NOTE: 16 & 32 GB Memory Stick DO work!!*
After more testing, I was able to get both a 16 and 32 GB memory stick to work!
I needed to use the official SDcard.org (official governing body of SD card standards) formatting program :
(https://www.sdcard.org/downloads/form...)
and now both 16 and 32GB memory sticks work.
Items needed:
• USB A to A cable (male to male) https://amzn.to/3rsLDef
• USB memory stick or thumb drive of 4 to 32 GB.
• Windows 10 or Windows 11 laptop (Won't work on Windows 7)
For some reason formatting them on Windows 11 and Mac OS Ventura didn't work...
BUT the official SD formatter did!
This should make it a little easier to find a USB stick to do this.
If this or any other MotorvateDIY video has helped you or saved you money, please consider supporting this
channel: https://ko-fi.com/motorvatediy
Anything you can do is greatly appreciated!
Amazon affiliate link for the "USB 3.0 A to A Male Cable" used in the episode:
3ft/1m
https://amzn.to/3rsLDef
6ft/2m
https://amzn.to/3EJFg9H
9ft/3m
https://amzn.to/3Rz0puH
Note:
MotorvateDIY only endorses items we've personally used and liked.
As an Amazon Associate, if you purchase anything using our referral links, we may get a small commission at no additional cost to you.
*Disclaimer*
If you decide to follow the steps in the video, you agree to take full responsibility for your actions.
I assume no responsibility or liability.
These steps have been tested on my G37 for the last 3 months, without any problems.
However, that is not a long time to test and that is just one car.
On this episode of MotorvateDIY garage, we'll show you how to enable the "Tire Pressure" menu on the 2010-2013 G37's navigation system.
If your G37 doesn't have navigation, unfortunately, these steps won't work. :(
In the video, we show you how to make a back up copy of the navigation's configuration, before any changes are made. If there are problems, it can easily be put back to how it was :)
I enabled my Tire Pressure menu on my G37 about 3 months ago.
There has not been any problems and everything continues to work just like it did before.
Items needed:
• USB A to A cable (male to male) https://amzn.to/3rsLDef
• USB memory stick or thumb drive of 4 to 32 GB.
• Windows 10 or Windows 11 laptop (Won't work on Windows 7)
Thanks for watching and please let me know in the comments how you made out!
11 ماه پیش
در تاریخ 1402/07/03 منتشر شده
است.
8,788
بـار بازدید شده