| How to install Gate valve,Check valve, PPR pipe & Fittings.
6.4 هزار بار بازدید -
2 سال پیش
-
This video shows how to
This video shows how to install gate valve, check valve, PPR pipe & fittings.
A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate.
Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns, the valve will close to protect the piping, other valves, pumps etc.
Notes:
1.) During the design, Union Patente was missed but included in the actual installation.
2.) During the installation, we cannot find PPR gate valve & check valve in the nearby hardware thus, we used brass check valve and gate valve combined with PPR adapters.
A gate valve is the most common valve for water supply systems. It represents a linear-motion isolation valve and has a function to stop or allow the flow. Gate valves got their name from the closure element sliding into the flow stream to provide shutoff and, therefore, acting like a gate.
Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns, the valve will close to protect the piping, other valves, pumps etc.
Notes:
1.) During the design, Union Patente was missed but included in the actual installation.
2.) During the installation, we cannot find PPR gate valve & check valve in the nearby hardware thus, we used brass check valve and gate valve combined with PPR adapters.
2 سال پیش
در تاریخ 1401/08/24 منتشر شده
است.
6,495
بـار بازدید شده