John Deere 47" Snowblower Repair
14.8 هزار بار بازدید -
2 سال پیش
-
Since the John Deere 855
Since the John Deere 855 is up and running I can finally share with you my new "used" snowblower that I picked up at an auction a couple weeks ago. Even though it's summer, I will need this time to get this snowblower sorted out, so I can use it all winter long to remove some serious snow & hard-packed snow drifts.
In this video, I focus on the disassembly process and share with you all the parts that I removed from the John Deere 47" hydro cut snowblower. There is a little bit of wear on all the parts and there are some parts that need some real attention...so I'll do my best to repair everything for the upcoming assembly video.
Technically speaking the John Deere 655 & 755 were equipped with the 47" hydro cut and the 855 & 955 were able to handle the 59" hydro cut, but I couldn't find one of those. This one was an amazing deal, so I had to get it. The mounting hardware is all the same, just that the snowblower is not as wide! I bet this will work just as good once it's repaired!
🔽Hoodies & T-Shirts (Merch Store)🔽
https://workshop-rebuild.creator-spri...
⬇️Products⬇️
Permatex Ultra Black Gasket Maker: https://amzn.to/3GGUj4d
Lubriplate Assembly Grease: https://amzn.to/390j66i
Loctite: https://amzn.to/3P5vp1O
Teflon Tape: https://amzn.to/3LTZBtV
________________________________________________________________________
_
This snowblower also fits: John Deere 655, John Deere 755, John Deere 955
The John Deere 59" hydro cut snowblower is the same as this model, just wider!
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 4𝟎𝟎: https://bit.ly/3unVNfg
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
E-Mail: [email protected]
Music: https://share.epidemicsound.com/v6woxm
#snowblower #johndeere
In this video, I focus on the disassembly process and share with you all the parts that I removed from the John Deere 47" hydro cut snowblower. There is a little bit of wear on all the parts and there are some parts that need some real attention...so I'll do my best to repair everything for the upcoming assembly video.
Technically speaking the John Deere 655 & 755 were equipped with the 47" hydro cut and the 855 & 955 were able to handle the 59" hydro cut, but I couldn't find one of those. This one was an amazing deal, so I had to get it. The mounting hardware is all the same, just that the snowblower is not as wide! I bet this will work just as good once it's repaired!
🔽Hoodies & T-Shirts (Merch Store)🔽
https://workshop-rebuild.creator-spri...
⬇️Products⬇️
Permatex Ultra Black Gasket Maker: https://amzn.to/3GGUj4d
Lubriplate Assembly Grease: https://amzn.to/390j66i
Loctite: https://amzn.to/3P5vp1O
Teflon Tape: https://amzn.to/3LTZBtV
________________________________________________________________________
_
This snowblower also fits: John Deere 655, John Deere 755, John Deere 955
The John Deere 59" hydro cut snowblower is the same as this model, just wider!
Watch My Previous Rebuilds:
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 4𝟎𝟎: https://bit.ly/3unVNfg
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟎𝟎:https://bit.ly/3BbuWDz
𝐉𝐨𝐡𝐧 𝐃𝐞𝐞𝐫𝐞 𝟑𝟏𝟕:https://bit.ly/3wHy2x5
𝗕𝗼𝗹𝗲𝗻𝘀 𝗛𝗧𝟮𝟬 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/2NOLvlp
𝗔𝗹𝗹𝗶𝘀 𝗖𝗵𝗮𝗹𝗺𝗲𝗿𝘀 𝐂/𝐁 𝗧𝗿𝗮𝗰𝘁𝗼𝗿: http://bit.ly/3bvXLzd
𝗧𝗵𝗼𝗺𝗮𝘀 𝗛𝗟𝟭𝟳𝟯 𝗦𝗸𝗶𝗱 𝗦𝘁𝗲𝗲𝗿: http://bit.ly/3pDTBKM
𝗝𝗼𝗵𝗻 𝗗𝗲𝗲𝗿𝗲 𝟔𝟖/𝟕𝟎 𝗣𝗿𝗼𝗷𝗲𝗰𝘁: http://bit.ly/3bKGra3
𝐁𝐨𝐛𝐜𝐚𝐭 𝟕𝟓𝟑 𝐏𝐫𝐨𝐣𝐞𝐜𝐭: http://bit.ly/37EDeaD
E-Mail: [email protected]
Music: https://share.epidemicsound.com/v6woxm
#snowblower #johndeere
2 سال پیش
در تاریخ 1401/05/06 منتشر شده
است.
14,873
بـار بازدید شده