The must-have MDrive Retrofit DIY for BMW E9x M3s[ENG SUB]
2.1 هزار بار بازدید -
پارسال
-
The #MDrive
The #MDrive feature (option code or vehicle order: #2MD) for the BMW E9x M3s has an additional Sport Plus Mode for engine power control, an additional M Dynamic Mode for traction control, an additional Sport Mode for power-assisted steering and an #MDrive menu in the #iDrive interface.
#MDrive is optional in some markets so some #E9xM3 do not have this feature. The key part is the steering switch cluster, the #SZL. The #Mbutton on the steering wheel is optional because the original multifunction switch will be coded to work as the #Mbutton.
===Parts required===
#SZL (#2MD #MDrive + #521 Rain Sensor):
-61319153075
-61319123060
-61319179506
#SZL (#2MD #MDrive only):
-61319152149
-61319123061
The M Button: sold as in the whole switch cluster. The aftermarket ones are available on the Internet.
For the #E9xM3 without #iDrive, or the single-hump version, #MDrive is also retrofittable. There will be no #MDrive menu for customizing the combination of modes of electronic damper, engine power, traction control and steering assist.
===Sections===
0:00 Opening
1:06 Parts required
2:27 Tools required
3:29 Planning
4:17 What is MDrive?
5:30 MDrive as an option
7:27 Sport Plus Mode
8:24 M Dynamic Mode
9:36 Using the MDrive menu
10:37 My Story
The walkthrough
13:56 Disconnecting the car battery
14:23 Removing the steering wheel
15:19 Swapping the M button(optional)
16:51 Swapping the SZL
20:08 Coding General
21:46 Adding VO
23:32 Coding DME
25:58 Coding iDrive
27:34 Coding DSC(optional)
28:06 Calibrating the LWS
29:59 Clearing fault codes
30:22 Result & Summary
===Tools needed===
10 mm hex socket: car battery
Flat headed screwdriver or disposable chopstick: airbag
T10, T20 Torx bit: airbag, SZL
16 mm hex socket: the steering wheel
torque wrench (60 Nm): the steering wheel
NCS expert&NCS Dummy: Coding
Tools 32 or ISTA: Calibrating #LWS
INPA or ISTA: Clearing fault codes
===The retrofit process===
1. Disconnect car battery.
2. Remove the steering wheel.
3. Replace M Button (optional)
4. Replace the #SZL
5. Restore everything.
6. Change VO.
7. Code DME.
8. Code CAPPL of iDrive.
9. Calibrate steering angle sensor, the #LWS.
10. Clear fault codes
11. Enjoy the MDrive!
===Music===
It's You by Jessie Villa
Content ID: B3UT5DU1ESLR9POH
پارسال
در تاریخ 1402/01/14 منتشر شده
است.
2,102
بـار بازدید شده