Cox Tee Dee TD .049 .051 .09 .15 Needle Valve Repositioning to the other side
1.9 هزار بار بازدید -
8 سال پیش
-
There is a little more
There is a little more to rotating the needle valve around in a Cox Tee Dee engine than may meet the eye. I explain how it can be done wrong and how to do it right. The engine will run either way but the correct repositioning keeps your fingers away from the spinning prop in the field.
I misspoke a couple of times in the video, calling the needle valve assembly the "carb body" a couple of times.
This is the engine I am using on a RingMaster Jr., and the Tee Dee .09 does a pretty good job on .012" / 50' lines.
Now I have my GoPro back in service I will try to get some flying video.
Video'ed with GoPro3 White. Looks like there was a film on parts of the lens, even though I tried to keep it clean in the shop, surrounded by oily engines.
I misspoke a couple of times in the video, calling the needle valve assembly the "carb body" a couple of times.
This is the engine I am using on a RingMaster Jr., and the Tee Dee .09 does a pretty good job on .012" / 50' lines.
Now I have my GoPro back in service I will try to get some flying video.
Video'ed with GoPro3 White. Looks like there was a film on parts of the lens, even though I tried to keep it clean in the shop, surrounded by oily engines.
8 سال پیش
در تاریخ 1395/07/21 منتشر شده
است.
1,970
بـار بازدید شده