How to Install the ICONIC Independent Two-Stage Trigger – RISE Armament

This video details how to install your ICONIC Independent Two-Stage Trigger into a stripped lower.

Thanks to the ICONIC Trigger's incredibly simple installation, you'll have your trigger installed within just a few minutes.

1) Drop trigger assembly into lower receiver
2) Tilt trigger assembly back and insert safety
3) Insert anti-walk pin into the hammer pin hole
4) While applying downward pressure on the hammer, insert anti-walk pin into trigger hole
5) Install and fasten the anti-walk pin screws into anti-walk pins (optional: apply pink Loctite to screws)
6) Flip lower upside down and Insert safety detent into hole below the safety
7) Insert safety detent spring into grip
8) Insert allen head into grip screw
9) Slide grip onto lower receiver while lining up the safety detent spring into the lower receiver safety detent hole
10) Keep pressure on grip wile inserting grip screw into grip
11) Fasten grip screw until tight
12) Double check that the safety flips to fire and safe

If you have any questions about your RISE Armament trigger, please email our customer service team, [email protected].

Products seen in the video:

ICONIC Independent Two-Stage Trigger: https://risearmament.com/product/icon...

RISE Armament Stripped AR-15 Lower: https://risearmament.com/product/rise...

Fix It Sticks' The Works Toolkit: https://risearmament.com/product/fix-...

RISE Armament Patch: https://risearmament.com/product/rise...

RISE Armament Lower Parts Kit: https://risearmament.com/product/ar-1...