How to Replace Transmission Mount 2007-2011 Honda Civic
14.9 هزار بار بازدید -
2 سال پیش
-
Buy Now!New Transmission Mount from
Buy Now!
New Transmission Mount from 1AAuto.com http://1aau.to/ib/1ATMT00036
Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens. This video shows you how to install a new made to fit TRQ transmission mount on your 2007-2011 Honda Civic.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• No. 3 Phillips Screwdriver http://1aau.to/oRo/1AXAA00013
• 10mm Wrench http://1aau.to/onK/1AXAA00010
• 14mm Wrench http://1aau.to/onK/1AXAA00010
• 10mm Socket http://1aau.to/oJ5/1AXAA00017
• 14mm Socket http://1aau.to/oQU/1AXAA00015
• 17mm 12-Point Socket
• 1/2 Inch Ratchet http://1aau.to/otT/1AXAA00043
• Socket Extensions http://1aau.to/oQU/1AXAA00015
• Safety Glasses http://1aau.to/oeB/1AXAA00343
• Floor Jack http://1aau.to/oph/1AXAA00068
Subscribe: @trq
Check out our playlist:
Honda Civic 2005-2011 8th Generation: Honda Civic 2006-2011 8th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
New Transmission Mount from 1AAuto.com http://1aau.to/ib/1ATMT00036
Like many other load bearing parts on your vehicle, the transmission mount contains rubber bushings for smooth, comfortable driving. And like other parts, the rubber bushings can wear and rot over time. It’s a good idea to replace them when that happens. This video shows you how to install a new made to fit TRQ transmission mount on your 2007-2011 Honda Civic.
This process should be similar on the following vehicles:
2006 Honda Civic
2007 Honda Civic
2008 Honda Civic
2009 Honda Civic
2010 Honda Civic
2011 Honda Civic
Tools you will need:
• No. 3 Phillips Screwdriver http://1aau.to/oRo/1AXAA00013
• 10mm Wrench http://1aau.to/onK/1AXAA00010
• 14mm Wrench http://1aau.to/onK/1AXAA00010
• 10mm Socket http://1aau.to/oJ5/1AXAA00017
• 14mm Socket http://1aau.to/oQU/1AXAA00015
• 17mm 12-Point Socket
• 1/2 Inch Ratchet http://1aau.to/otT/1AXAA00043
• Socket Extensions http://1aau.to/oQU/1AXAA00015
• Safety Glasses http://1aau.to/oeB/1AXAA00343
• Floor Jack http://1aau.to/oph/1AXAA00068
Subscribe: @trq
Check out our playlist:
Honda Civic 2005-2011 8th Generation: Honda Civic 2006-2011 8th Generation
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
2 سال پیش
در تاریخ 1400/12/02 منتشر شده
است.
14,997
بـار بازدید شده