Walksnail Screen Sharing and FULL Setup Guide

IRONQUAD
IRONQUAD
1 هزار بار بازدید - 12 ماه پیش - SKIP to
SKIP to 1:51 for Screen Sharing Settings
(Note: this procedure MUST be performed every time during start up)

Full setup from updating the firmware, binding, and using 2nd goggle/receiver for screen sharing!


00:00 Choosing the Correct Firmware & where to find it (FW)
00:29 Updating FW on Goggle/VRX
01:01 Updating FW on VTX
01:24 Binding Goggle/Receiver to VTX

01:51 Screen Sharing Settings (Main Goggle/Receiver)
[Note: Only the Main Goggle needs to be bound to the VTX!]

02:17 Screen Sharing Settings (2nd Goggle/Receiver)
[Note: This is for the 2nd goggle or VRX that is used for spectating. Does NOT need to be bound to the VTX]


#walksnail #avatarscreensharing #walksnailscreensharing #walksnailhowtobind #avatarhowtobind #walksnailfirmwareupdate #walksnailfwupdate #avatarfirmwareupdate #avatarfwupdate #walksnailhowtoscreenshare #avatarhowtoscreenshare #walksnailbindguide #avatarbindguide #avatarhowtobind #walksnailhowtobind #fatsharkscreensharing #dominatorhdscreensharing #reconhdscreensharing #fatsharkbinding #dominatorhdbinding #reconhdbinding #fatsharkfirmwareupdate #dominatorhdfirmwareupdate #reconhdfirmwareupdate
12 ماه پیش در تاریخ 1402/06/03 منتشر شده است.
1,024 بـار بازدید شده
... بیشتر