How to Fix Niagara Stealth Toilet for under $2.00 - Hissing Noise & slow water fill with weak flush
52.6 هزار بار بازدید -
3 سال پیش
-
My Niagara Stealth toilet (model
My Niagara Stealth toilet (model N7714) had a hissing noise, and I discovered it was due to the fill valve filling the tank with water very slowly. This also produced a weak flush when the water had not yet completely filled. I searched online for answers, but the company has only one troubleshooting video that did not help. I then called the Niagara customer support line, only to be left on hold for over 90 minutes and never get through to a representative.
Since I have 2 of these toilets in my house, by trial and error I found the culprit was a Fill Valve Seal. I bought this item on Amazon at the following link for $1.68 - https://www.amazon.com/Fluidmaster-24.... I will not make any money if you click the link, it is just there for your reference.
In this video, I show the original problem, how I replaced the valve seal, and how the toilet was fixed after a quick 5 minute repair. I bet a lot of folks change out the whole entire fill valve assembly, which costs more money, takes longer, is messier, and adds unnecessary plastic waste to our landfills.
I hope this video will help a lot of folks avoid the hours spent on troubleshooting that I did, and fix your toilets quickly and easily. I cannot guarantee that this valve will fix whatever problem you are having, but if you hear the same hissing as in this video, and if it takes a long time for your tank to fill like mine did, then this should do the trick.
If you have a Niagara toilet, you can find your model number by lifting off the tank cover, and looking at the back wall inside the tank where the model number should be printed. My research showed that this Fluidmaster Fill Valve Seal will fit the following Niagara toilet models:
NANO Dual Flush Compact Elongated 12” model # N7747T-DF
PHANTOM Single Flush Elongated 12” model # N7747T
ONE PIECE Single Flush Elongated 12” model # N7711
THE ORIGINAL Single Flush Elongated 12” model # N7714
THE ORIGINAL Single Flush Round 12” model # N7714
THE ORIGINAL Single Flush Round 10” model # N7714
THE ORIGINAL Single Flush Elongated 12” model # 77000WHAI1
THE ORIGINAL Single Flush Round 12” model # 77001RWHAI1
THE ORIGINAL Side Handle Single Flush Elongated 12” model # N7714TFH
THE ORIGINAL Side Handle Single Flush Round 12” model # N7714TFH
THE ORIGINAL Side Handle Single Flush Round 10” model # N7714TFH
THE ORIGINAL Dual Flush Elongated 12” model # N7714T-DF
THE ORIGINAL Rear Outlet Single Flush Elongated 4” model # N7799T
However, it will NOT work in the Niagara SENTINEL model # N2235T.
Please keep in mind that the particular Fill Valve Seal used in this video works in any toilet using the FluidMaster 200, 400 and 747 models - not just Niagara toilets.
If this video helps you, please click the LIKE button, leave a comment, and/or SUBSCRIBE.
Since I have 2 of these toilets in my house, by trial and error I found the culprit was a Fill Valve Seal. I bought this item on Amazon at the following link for $1.68 - https://www.amazon.com/Fluidmaster-24.... I will not make any money if you click the link, it is just there for your reference.
In this video, I show the original problem, how I replaced the valve seal, and how the toilet was fixed after a quick 5 minute repair. I bet a lot of folks change out the whole entire fill valve assembly, which costs more money, takes longer, is messier, and adds unnecessary plastic waste to our landfills.
I hope this video will help a lot of folks avoid the hours spent on troubleshooting that I did, and fix your toilets quickly and easily. I cannot guarantee that this valve will fix whatever problem you are having, but if you hear the same hissing as in this video, and if it takes a long time for your tank to fill like mine did, then this should do the trick.
If you have a Niagara toilet, you can find your model number by lifting off the tank cover, and looking at the back wall inside the tank where the model number should be printed. My research showed that this Fluidmaster Fill Valve Seal will fit the following Niagara toilet models:
NANO Dual Flush Compact Elongated 12” model # N7747T-DF
PHANTOM Single Flush Elongated 12” model # N7747T
ONE PIECE Single Flush Elongated 12” model # N7711
THE ORIGINAL Single Flush Elongated 12” model # N7714
THE ORIGINAL Single Flush Round 12” model # N7714
THE ORIGINAL Single Flush Round 10” model # N7714
THE ORIGINAL Single Flush Elongated 12” model # 77000WHAI1
THE ORIGINAL Single Flush Round 12” model # 77001RWHAI1
THE ORIGINAL Side Handle Single Flush Elongated 12” model # N7714TFH
THE ORIGINAL Side Handle Single Flush Round 12” model # N7714TFH
THE ORIGINAL Side Handle Single Flush Round 10” model # N7714TFH
THE ORIGINAL Dual Flush Elongated 12” model # N7714T-DF
THE ORIGINAL Rear Outlet Single Flush Elongated 4” model # N7799T
However, it will NOT work in the Niagara SENTINEL model # N2235T.
Please keep in mind that the particular Fill Valve Seal used in this video works in any toilet using the FluidMaster 200, 400 and 747 models - not just Niagara toilets.
If this video helps you, please click the LIKE button, leave a comment, and/or SUBSCRIBE.
3 سال پیش
در تاریخ 1400/06/16 منتشر شده
است.
52,629
بـار بازدید شده