15kW Vortex turbine with more technical details
3.8 میلیون بار بازدید -
6 سال پیش
-
In this video we want
In this video we want to show the 15kW vortex turbine of Donihue, Chile, with more details. This turbine is operating with a head of 1.7m and a flow of 1.8m3/s. In the outflow you will see that there's head left. That's because our customer wants to expand to 2 turbines in series in the future (modular components allow him to do that). As you can see the turbine is covered with a grid to keep larger debris and children from falling into the turbine. There's also a trash rack in front of the inlet that keeps all debris with a diameter above 10cm out of the turbine basin. The core of this unit was assembled in our factory and then transported in one piece to the installation site. Over there it was a matter of lowering the turbine into the concrete outflow pit and connecting all electrical wires. No expertise required at that point. The concrete structures were build in advance in about 3 weeks as this was our first turbine. We are currently working on a prefabricated design that should be installed in under a week.
If you want to get in touch with us go to www.turbulent.be/contact-us
and be sure to like us on facebook: Facebook: TurbulentHydro
If you want to get in touch with us go to www.turbulent.be/contact-us
and be sure to like us on facebook: Facebook: TurbulentHydro
6 سال پیش
در تاریخ 1396/11/30 منتشر شده
است.
3,899,118
بـار بازدید شده