Implementing Time Delay For a Low Cost Digital Beamformer
9.6 هزار بار بازدید -
هفته قبل
-
This is the third video
This is the third video of the DIY Phased Array Beamformer using the ADALM-PLUTO. In previous videos, we've used phase shifting to form the beam. But in this video, we'll dig into why and how to use baseband digital time delays instead.
The python files used in this video are found here: github.com/jonkraft/Pluto_Beamformer
Part 1 of this series, and the best place to get started, is here:
• Build Your Own Phased Array Beamformer
Here are the links I mentioned:
ADALM-PLUTO, rev C: www.digikey.com/short/8q0t4hf2
Crystek CLPFL-2400 Filters: www.digikey.com/short/ht1q39zp
2.3 GHz Antenna: a.co/d/hMSP3xR
300MHz antenna: www.amazon.com/gp/product/B0BG9252P7
Stand: a.co/d/6VuwgZ8
ERA Synth Micro: erainstruments.com/
هفته قبل
در تاریخ 1403/07/12 منتشر شده
است.
9,642
بـار بازدید شده