DIY $30 Kayak trolling motor mount PART 1
73.9 هزار بار بازدید -
4 سال پیش
-
Easy DIY to make a
Easy DIY to make a trolling motor mount for your kayak.
Supplies:
(2) 3in 1/4 Screws with (2) washers
(2) 6in 1/4 Screws with (2) washers
(4) Wing nuts
(1) 6 in 2x4 lumber
(1) 1 in Steel square tubing
Tools:
Angle Grinder
Drill
Screw Driver
Filmed with a Nikon D3100 (Don't use auto focus, it makes too much noise)
Edited with iMovie.
Supplies:
(2) 3in 1/4 Screws with (2) washers
(2) 6in 1/4 Screws with (2) washers
(4) Wing nuts
(1) 6 in 2x4 lumber
(1) 1 in Steel square tubing
Tools:
Angle Grinder
Drill
Screw Driver
Filmed with a Nikon D3100 (Don't use auto focus, it makes too much noise)
Edited with iMovie.
4 سال پیش
در تاریخ 1399/02/18 منتشر شده
است.
73,906
بـار بازدید شده