Homemade PCB milling machine
560.8 هزار بار بازدید -
14 سال پیش
-
For those asking for the
For those asking for the plans, BOM, etc, I merged all files in a 7-Zip file so you can download it.
It's included:
- the complete 3D model (in Solidworks format, main file is CNC.SLDASM)
- the 2D drawings used to machine the parts (if it doesn't have a 2D drawing, it's a laser cut part, so there's only the 2D DXF file used by the laser mahines)
- some pictures from the assembly
- a powerpoint presentation about the project
Note that all material is in portuguese. It shouldn't be a big deal, since you can check all data and dimensions on the 3d model.
It was a graduation project, so if you have interest send a message and I'll send you the paper explaining the design choices, calculations, etc. But it's in portuguese as well.
A few notes that I remenber:
- A couple of hole were modeled with the wrong diameter, but I don't remember which ones anymore.
- I wouldn't use countersink bolts if I had to rebuild this machine. It gave me a lot of trouble when aligning the linear slides.
If you have any further questions feel free to ask.
Link for download:
http://www.3dmacro.net/public/CNC_Mil...
It's included:
- the complete 3D model (in Solidworks format, main file is CNC.SLDASM)
- the 2D drawings used to machine the parts (if it doesn't have a 2D drawing, it's a laser cut part, so there's only the 2D DXF file used by the laser mahines)
- some pictures from the assembly
- a powerpoint presentation about the project
Note that all material is in portuguese. It shouldn't be a big deal, since you can check all data and dimensions on the 3d model.
It was a graduation project, so if you have interest send a message and I'll send you the paper explaining the design choices, calculations, etc. But it's in portuguese as well.
A few notes that I remenber:
- A couple of hole were modeled with the wrong diameter, but I don't remember which ones anymore.
- I wouldn't use countersink bolts if I had to rebuild this machine. It gave me a lot of trouble when aligning the linear slides.
If you have any further questions feel free to ask.
Link for download:
http://www.3dmacro.net/public/CNC_Mil...
14 سال پیش
در تاریخ 1389/05/02 منتشر شده
است.
560,816
بـار بازدید شده