AUDIOPHILE Acoustic Research ARXB Turntable - DIY Rebuild with Modifications!
14.6 هزار بار بازدید -
2 سال پیش
-
The Acoustic Research ARXB is
The Acoustic Research ARXB is astonishing value for money. A vintage audiophile turntable killer that punches well above it's weight!
Even in stock form this humble American made, belt driven suspended sub-chassis turntable will knock over turntables three times it's price.
Full List of build and mods
fully cleaned sub-chassis and bearing wells.
new delrin thrust pads
new ceramic ball bearing for tonearm well
polished all bearings and platter
upgraded vertical tonearm bearings to sapphire cups
swapped in a technics arm wand with sme headshells
stripped and serviced haydon motor
new capacitors, power and rca cables
new plinth built from pine and meranti
painted the top plate a bit creatively
currently playing between a Shure m75e MM cartridge and an Denon DL-110 MC cartridge
Previous Videos
Disassembling - Acoustic Research XB Turntable Tear Down
Polishing the platter - Polishing A Turntable Platter - Acous...
Servicing the motor - Servicing The Haydon Motor for AR XA/...
Rewiring and modifying the tonearm - Rewiring The Acoustic Research Tonear...
Pulley Upgrade - Acoustic Research XA/XB Pulley Upgrade
0:00 Introduction
0:03 Disassembling
0:34 Polishing the platter
1:28 Servicing the motor
5:08 Rewiring and modifying the tonearm
7:06 Cleaning the chassis
7:20 Building a new plinth
12:42 Putting everything back together
16:28 The finished product
Even in stock form this humble American made, belt driven suspended sub-chassis turntable will knock over turntables three times it's price.
Full List of build and mods
fully cleaned sub-chassis and bearing wells.
new delrin thrust pads
new ceramic ball bearing for tonearm well
polished all bearings and platter
upgraded vertical tonearm bearings to sapphire cups
swapped in a technics arm wand with sme headshells
stripped and serviced haydon motor
new capacitors, power and rca cables
new plinth built from pine and meranti
painted the top plate a bit creatively
currently playing between a Shure m75e MM cartridge and an Denon DL-110 MC cartridge
Previous Videos
Disassembling - Acoustic Research XB Turntable Tear Down
Polishing the platter - Polishing A Turntable Platter - Acous...
Servicing the motor - Servicing The Haydon Motor for AR XA/...
Rewiring and modifying the tonearm - Rewiring The Acoustic Research Tonear...
Pulley Upgrade - Acoustic Research XA/XB Pulley Upgrade
0:00 Introduction
0:03 Disassembling
0:34 Polishing the platter
1:28 Servicing the motor
5:08 Rewiring and modifying the tonearm
7:06 Cleaning the chassis
7:20 Building a new plinth
12:42 Putting everything back together
16:28 The finished product
2 سال پیش
در تاریخ 1401/09/09 منتشر شده
است.
14,623
بـار بازدید شده