Homemade strut spring compressor | Awesome easy to use | DIY
41.4 هزار بار بازدید -
3 سال پیش
-
I have used the spring
I have used the spring clamps and i did not like them. It felts unsafe. The clamps would slide slightly causing the spring to unevenly clamp on the spring itself. It required a lot of time to evenly clamp the springs down. The spring was sloping at an angle make difficult to clamp or sometimes you couldn't get the clamps in like the rear springs were too packed together. I made a spring compressor would eliminate all those issues. This is an old design. You see a lot countries with primitive technologies used them. They are effective. In most developed countries, they always to market you something think they are better but they are not.
3 سال پیش
در تاریخ 1400/02/05 منتشر شده
است.
41,466
بـار بازدید شده