DIY Stereo Amplifier With Arduino Tone Controll and OLED Display

Cheap & quick PCB, 3D Printing, CNC machining and fabrication services from PCBWay:  https://www.pcbway.com/
Hello bro, in this video I want to make a stereo amplifier with an Arduino-based tone control.
For the audio processor, I used the TDA7439 chip which was controlled by ARDUINO PRO MINI 5V/16MHz with the Arduino program/sketch that I got from rcl-radio at this link; http://rcl-radio.ru/?p=131205
PLEASE NOTE, the sketch that I used and included the link below has changed a lot so that it works well with this amp circuit.
The display menu uses an SSD1306, 128x64 OLED display so that it has a simple appearance and does not take up space.
Some of the menus available are VOLUME, BASS, MIDLE, TREBLE, BALANCE, INPUT SELECTOR, INPUT GAIN, AND POWER ON/STANBY.
For the power amplifier I used the TA8221 which has been proven to produce good sound.
The overall circuit requires a single supply 12V voltage source.
Please check the video on Barlex Respectaizer Youtube Channel

If you need you can download some of files :
Gerber file  : https://drive.google.com/file/d/1gTOc...
Partlist : https://drive.google.com/file/d/10xfE...
Arduino Library (extract to get some zip) : https://drive.google.com/file/d/1-Ahc...

Tempat saya beli PCB Holder disini : https://tokopedia.link/Uypl44oS6tb
Solder yang saya pakai : https://tokopedia.link/2lHlvcMS6tb

Beli pcb langsung dari kami :
Tokopedia Barlex Audio

Email for endorsement :
[email protected]