How to replace HP power supply with standard ATX PSU (PWRCMD + 2x 4-pin)
15.4 هزار بار بازدید -
2 سال پیش
-
This is how I wired
This is how I wired a standard ATX PSU to a computer with HP's non-standard/proprietary PSU with 2x 4-pin and 7-pin PWRCMD connectors. This allowed me to upgrade my graphics card.
Works at least for HP Desktop M01-F1823no with L70042-006 power supply (and possibly for many other models). Motherboard might be ERICA 3 or ERICA 5 or something else.
Note that there might be multiple variations of HP power supply wiring configurations, even if they are using the same connectors. You can try to check the pin configuration using a multimeter, if you are unsure.
Works at least for HP Desktop M01-F1823no with L70042-006 power supply (and possibly for many other models). Motherboard might be ERICA 3 or ERICA 5 or something else.
Note that there might be multiple variations of HP power supply wiring configurations, even if they are using the same connectors. You can try to check the pin configuration using a multimeter, if you are unsure.
2 سال پیش
در تاریخ 1401/09/28 منتشر شده
است.
15,426
بـار بازدید شده