How to make an Inflatable Product - T300 Extreme I Miller Weldmaster
45.9 هزار بار بازدید -
7 سال پیش
-
Website:
Website: www.weldmaster.com/
Machine Page: www.weldmaster.com/machines/t300-extreme-flex/
Learn how to make an inflatable using our hot air welder T300 Extreme!
A flexible welding solution with ability to use hot air and hot wedge welding technologies with an unlimited array of seam types. Use hot air or hot wedge to weld overlaps, hems, pockets, and more. The T300 Extreme Universal is our most universal welder handling any job.
0:10 How To Insert Valve Inside The Tube
0:20 How To Weld The First Bottom To The Vertical Flat Post "A & B Joint"
1:39 How To Weld Two Straight Seams Together "B & C Joint"
2:25 How To Weld The Arch "C & D Joint"
3:26 How To Weld The Top Of The Arch "D & D Joint"
3:51 Welding The Opposite Side
3:57 How To Close Off The Seam
5:12 How TO Inflate The Actual Product
5:30 Can You Weld Multiple Shapes & Sizes?
Want to learn more? Visit our website below or email us at [email protected]
Facebook:
www.facebook.com/millerweldmaster/
Linkedin:
www.linkedin.com/company/miller-weldmaster
Instagram:
www.instagram.com/millerweldmaster/?hl=en
Twitter:
twitter.com/weldmaster?lang=en
7 سال پیش
در تاریخ 1397/01/17 منتشر شده
است.
45,936
بـار بازدید شده